Citroen Jumpy Multispace (2014 year). Manual — part 12
9.13
05
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
Select "
Select destination " and
confi rm, then select "
GPS coordinates "
and confi rm.
Enter the GPS coordinates and confi rm
"
OK " to start the guidance.
Press
NAV to display the
"
Navigation - guidance " menu.
NAVIGATION - GUIDANCE
TOWARDS GPS COORDINATES
TOWARDS A POINT ON THE MAP
With the map displayed, press
OK to
display the contextual menu. Select
"
Move the map " and confi rm.
Press
OK to display the contextual
menu for "
Move the map " mode.
Select "
Select as destination " or
"
Select as stage " and confi rm.
Move the cursor using the control to
identify the desired destination.
9.14
05
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
NAVIGATION - GUIDANCE
The points of interest (POI) indicate all of the service locations in the vicinity
(hotels, various businesses, airports…).
Select the "
Enter an address " function
and confi rm, then select "
Select
destination " and confi rm.
To select a POI close to your current
location, select "
POI " and confi rm, then
select "
Around the current place " and
confi rm.
To select a POI as a stage on the route,
select "
POI " and confi rm, then select " On
the route " and confi rm.
To select a POI as a destination, fi rst
enter the country and town (see "Towards
a new destination"), select "
POI " and
confi rm, fi nally select "
Near " and confi rm.
Near
Near
Search for POIs in the categories
suggested in the following pages.
Select "
Search by Name " to search for POIs by name and not by
proximity.
Select the POI and confi rm "
OK " to start
the guidance.
Press
NAV to display the
"
Navigation - guidance " menu.
9.15
05
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
LIST OF PRINCIPAL POINTS OF INTEREST (POI)
NAVIGATION - GUIDANCE
This icon appears when several POIs are grouped
together in the same area. Zooming in on this icon
shows details of the POIs.
* According to availability in the
country.
The detailed procedure for updating POIs can be found at "http://citroen.navigation.com".
9.16
05
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
NAVIGATION - GUIDANCE
ALERT PARAMETERS
RISK AREAS
Select:
-
"Visual alert"
-
"Audible alert"
-
"Alert only in guidance"
-
"Overspeed alarm only".
The choice of time of notifi cation defi nes
how long in advance that Risk area
warnings are given.
Select "
OK " to confi rm the screen.
Select "
Guidance options " and confi rm,
then select "
Set parameters for risk
areas " and confi rm.
These functions are only available if risk areas have been
downloaded and installed on the system.
The detailed procedure for updating risk area POIs can be found at
www.citroen.com.
Press
NAV to display the " Navigation -
guidance " menu.
9.17
05
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
NAVIGATION - GUIDANCE
ADDING A STAGE
Press
NAV to display the
"
Navigation - guidance " menu.
Select "
Journey leg and route " then
confi rm.
Select "
Close to " a route passing
close to the stage or "
Strict " for a route
passing through the stage.
Confi rm "
OK " to start the guidance, and
give a general indication of the guidance
route.
Select "
Add a stage " then confi rm.
The address of the stage is entered as
a destination, by "
Enter an address ",
a contact in "
Directory ", or " Previous
destinations ".
ORGANISING STAGES
To organise stages, carry out
operations 1 to 2 again, then select
"
Order/delete journey legs " and
confi rm.
Select and confi rm to save the
modifi cations.
Select the stage that you want to move
in the order.
Select "
Delete " to delete the stage.
9.18
05
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
NAVIGATION - GUIDANCE
ROUTE OPTIONS
CALCULATION CRITERIA
Select "
Guidance options " and confi rm.
Select "
OK " and confi rm to save
the modifi cations.
Select "
Defi ne calculation criteria " and
confi rm.
This function allows modifi cation of:
-
the guidance criteria: ("
Fastest
route ", " Shortest route ",
"
Distance/Time "),
-
the exclusion criteria: ("
With tolls "
or "
With Ferry "),
- traffi c avoidance: ("
Traffi c info ").
Press
NAV to display the
"
Navigation - guidance " menu.
If traffi c avoidance (Traffi c info) is selected, the system suggests
an alternative route if there is a delay on the guidance route.
9.19
05
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
Press
NAV to display the
"
Navigation - guidance " menu.
MAP MANAGEMENT
SELECTING THE POINTS OF INTEREST DISPLAYED
ON THE MAP
Select "
Map management " and confi rm.
Select from the various categories
the ones that you want to display on
the screen.
Select "
Map details " and confi rm.
Select "
By default " to have only " Oil stations, garages " and
"
Accident-prone area " appear on the map (if installed in
the system).
Select "
OK " then confi rm and select
"
OK " again then confi rm to save
the modifi cations.
9.20
05
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
NAVIGATION - GUIDANCE
Select "
Map management " and confi rm.
Select:
-
"
Vehicle direction " to have the map
follow the direction of travel,
-
"
North direction " to keep the map
always North up,
-
"
Perspective view " to display a
perspective view.
Select "
Map orientation " and confi rm.
The colour of the map, different from the day and night mode, is
confi gured in the "
SETUP " menu.
MAP ORIENTATION
Press
NAV to display the
"
Navigation - guidance " menu.
Street names are visible on the map from the 100 m scale.
9.21
05
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
Press
NAV to display the
"
Navigation - guidance " menu.
ADJUSTING THE GUIDANCE SPEECH SYNTHESIS
Select "
Guidance options " and confi rm.
ADJUSTING THE VOLUME/DEACTIVATION
Select "
Set speech synthesis " and
confi rm.
Select the volume graph and confi rm.
Select "
Deactivate " to deactivate voice messages.
Select "
OK " and press the dial
to confi rm.
Adjust the volume to the desired level
and confi rm.
The volume of messages can be adjusted during the transmission
of the message using the volume adjustment control.
The volume setting of guidance messages is also accessible via the
"
SETUP " / " Voice synthesis " menu.
9.22
05
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
NAVIGATION - GUIDANCE
MALE VOICE / FEMALE VOICE
Press
SETUP to display the
confi guration menu.
Select "
Select male voice " or " Select
female voice " then confi rm " Yes
" then confi rm "
" then confi rm "
"
to activate a male or female voice.
The system restarts.
Select "
Voice synthesis " and confi rm.
9.23
06
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
TRAFFIC INFORMATION
Access to the "TRAFFIC INFORMATION" menu
Go from the list to the menu (left/right).
" " " " " " " " " " " " " " " " " "
Traffi c information
Traffi c information
Traffi c information
Traffi c information
Traffi c information
Traffi c information
Traffi c information
Traffi c information
Traffi c information
Traffi c information
Traffi c information
Traffi c information
Traffi c information
Traffi c information
Traffi c information
Traffi c information
Traffi c information
Traffi c information
Traffi c information " " " " " " " " " " " " " " " " " "
or
Press "
TRAFFIC ".
9.24
06
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
TRAFFIC INFORMATION
CONFIGURE THE FILTERING AND DISPLAY OF TMC MESSAGES
TMC (Traffi c Message Channel) messages contain information on traffi c and weather conditions, received in real time and transmitted to the
driver in the form of audible announcements and symbols on the navigation map.
The navigation system can then suggest an alternative route to avoid a traffi c problem.
Press the
TRAFFIC button to display the
Traffi c information menu.
Select the "
Geographic fi lter " function
Geographic fi lter
Geographic fi lter
and confi rm.
The system offers a choice of:
-
"
Retain all the messages ",
or
-
"
Retain the messages "
● "
Around the vehicle ", (confi rm
the mileage to modify and select
the distance),
● "
On the route ".
Confi rm "
OK " to save the modifi cations.
We recommend:
- a fi lter on the route and
- a fi lter around the vehicle of:
- 12 miles (20 km) in urban areas,
- 30 miles (50 km) on motorways.
9.25
06
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
TRAFFIC INFORMATION
PRINCIPAL TMC SYMBOLS
Red and yellow triangle: traffi c information, for example:
Black and blue triangle: general information, for example:
RECEIVING TA MESSAGES
The TA (Traffi c Announcement) function gives priority to TA alert
messages. To operate, this function needs good reception of a
radio station transmitting this type of message. When a traffi c report
is transmitted, the current audio source (Radio, CD, USB, …) is
interrupted automatically to play the TA message. Normal playback
of the audio source resumes at the end of the transmission of
the message.
Press
RADIO to display the " FM / AM
band " menu.
Select "
Guidance options " then
confi rm.
Activate or deactivate "
TA " then confi rm.
The volume setting for TA messages can be adjusted only during the
transmission of this type of alert.
Activate or deactivate the function at any time by pressing the button.
During a message, press the button to interrupt it.
9.26
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
9.27
07
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
USING THE TELEPHONE
Access to the "TELEPHONE" menu
" " " " " " " " " " " " " " " " " "
Telephone
Telephone
Telephone
Telephone
Telephone
Telephone
Telephone
Telephone
Telephone
Telephone
Telephone
Telephone
Telephone
Telephone
Telephone
Telephone
Telephone
Telephone
Telephone
Telephone
Telephone
Telephone
Telephone " " " " " " " " " " " " " " " " " "
Go from the list to the menu (left/right).
or
Press
PHONE .
To make a call, select a number in the list and confi rm "
OK "
to start the call.
Connecting a different telephone deletes the list of
recent calls.
No telephone connected.
Telephone connected.
Incoming call.
Outgoing call.
Synchronisation
of address book in
progress.
Telephone call in
progress.
In the top bar of the permanent
display
9.28
07
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
PAIRING A BLUETOOTH TELEPHONE
FIRST CONNECTION
For reasons of safety and because they require prolonged attention
on the part of the driver, the operations for pairing the Bluetooth
mobile telephone to the hands-free system of the audio unit must be
carried out with the
vehicle stationary .
Activate the telephone's Bluetooth
function and ensure that it is "shown
to all" (telephone confi guration).
Press this button.
Select the name of the desired
peripheral from the list of devices
detected then select "
Connect " and
confi rm.
The system offers to connect the
telephone:
-
in "
Hands-free mode " (telephone only),
-
in "
Audio " mode (streaming: playing
music fi les on the telephone),
-
or "
All " (for selection of both modes).
Select "
OK " and confi rm.
Select "
Bluetooth functions " and
confi rm.
Select "
Peripherals search " and confi rm.
The list of peripherals detected is
displayed. Wait until the "
Connect "
button is available.
USING THE TELEPHONE
Visit www.citroen.co.uk for more information (compatibility,
additional help, …).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст