Citroen C2 (2008 year). Manual — part 12
4
1
1
6
6
2
2
7
7
4
4
9
9
5
5
10
10
3
3
8
8
Saisir code authentiication
0
1
OK
Del
2 3 4 5 6 7 8 9
_
BLUETOOTH FUNCTIONS
For reasons of safety and because they require prolonged attention
on the part of the driver, the operations for pairing of the Bluetooth
mobile telephone with the Bluetooth system of your audio equipment
should only carried out with the vehicle stationary. The ignition must
be on.
Activate the telephone's Bluetooth
function.
A window is displayed with "Searching...".
Press the MENU button.
In the menu, select:
- Bluetooth telephone function - Audio
- Bluetooth confi guration
- Perform a Bluetooth search
The services offered depend on the network, the SIM card and the
compatibility of the Bluetooth equipment used.
Consult your telephone's manual and your operator to fi nd out which
services are available to you. A list of mobile telephones which offer the
best range of services is available from the network, contact your dealer.
BLUETOOTH TELEPHONE
SCREEN C
(AVAILABLE DEPENDING ON MODEL AND VERSION)
The TELEPHONE menu gives access to the following functions in
particular: Directory * , Call list, Pairing management.
The fi rst 4 telephones recognised are displayed in this window.
"Pairing of Name_telephone successful" appears on the screen.
The automatic connection authorised is only active after the
telephone has been confi gured.
The directory and the call list can be accessed after the
synchronisation period.
OK
PAIRING A TELEPHONE
The pairing can also be initiated from the telephone.
A virtual keypad is displayed on the screen:
enter a code with at least 4 digits.
Confi rm by pressing OK.
Select the telephone to be connected from the list. Only one
telephone can be connected at a time.
A message is displayed on the screen of the
telephone chosen: to accept the pairing, enter
the same code on the telephone, then confi rm by
pressing OK.
If pairing fails, the number of attempts is not limited.
* if your telephone hardware is fully compatible.
5
1
1
2
2
1
1
2
2
1
1
2
2
3
3
YES
RECEIVING A CALL
An incoming call is announced by a ring and a superimposed display
on the multifunction screen.
Select the YES tab on the screen
using the buttons and confi rm by
pressing OK.
Press TEL or OK on the steering wheel controls to accept the call.
From the Bluetooth telephone function Audio menu, select Manage
the telephone call then call, call list or directory.
Press the TEL steering wheel control, or press and
hold OK for access to your directory.
Or
To dial a number, use your telephone's keypad, with
the vehicle stationary.
MAKING A CALL
Initiate the pairing between the telephone and
the vehicle. This pairing can be initiated from
the vehicle's telephone function menu or via the
telephone's keypad. See steps 1 to 10 on the
previous pages. During the pairing phase, the
vehicle must be stationary with the ignition on.
Select the telephone to be connected from the
telephone function menu.
The audio system connects to a newly paired
telephone automatically.
BLUETOOTH AUDIO STREAMING
(AVAILABLE DEPENDING ON MODEL AND VERSION)
Wireless transmission of the telephone's music fi les via the audio
equipment. The telephone must be able to manage the appropriate
bluetooth profi les (Profi les A2DP/AVRCP).
* In certain cases, playing of the Audio fi les must be initiated from the keypad.
** If the telephone supports the function.
Activate the streaming source by
pressing the SOURCE button * . The
tracks to be played can be controlled
as usual via the buttons on the Radio
control panel and the steering wheel
controls ** . The contextual information
can be displayed on the screen.
BLUETOOTH FUNCTIONS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст