Ford F150 Pickup. Manual — part 1282
Courtesy of FORD MOTOR CO.
TORQUE SPECIFICATIONS
TORQUE SPECIFICATIONS
Application
Ft. Lbs. (N.m)
Fuel Tank Shield Bolt
11 (15)
Ground Strap Nut
18 (25)
LPG Fill Valve Nut
20 (27)
LPG Fuel Line Fitting At Fuel Tank
46 (62)
LPG Fuel Line To Compuvalve Fittings
27 (36)
LPG Fuel Line To Fill Valve Fitting
21 (29)
LPG Fuel Tank Strap Bolt - Single Tank
24 (32)
LPG Fuel Tank Strap Bolt - Dual Tanks
85 (115)
LPG Tank Bracket Bolt
19 (26)
Spark Plug
13 (18)
Vaporizer Bracket Nut
18 (25)
Vaporizer Fuel Inlet Line
20 (27)
Vaporizer Fuel Outlet Line
18 (25)
Vaporizer Vent Line
17 (23)
INCH Lbs. (N.m)
Compuvalve Bracket Bolt - LPG
80 (9)
Compuvalve Connector Screw
18 (2)
Ignition Coil Bolt
53 (6)
Vaporizer Bracket Bolt
80 (9)
2003 Ford Pickup F150
2003 ENGINE PERFORMANCE Removal & Installation - F150 Pickup - Bi-Fuel - Gasoline/LPG
2003 ENGINE PERFORMANCE
Removal & Installation - Blackwood, Expedition, F150 Pickup & Navigator - Gasoline
AIR INDUCTION SYSTEMS
INTAKE MANIFOLD
Removal (4.2L - Upper Intake Manifold)
1. Disconnect negative battery cable. Remove air cleaner outlet tube. Disconnect the Idle Air Control (IAC)
valve electrical connector. Remove IAC valve. See Fig. 1 . Remove accelerator control splash shield. See
Fig. 2 . Disconnect accelerator and cruise control cable from throttle body. Detach accelerator cable and,
if equipped, the speed control cable actuator cable from the cable bracket on intake manifold. See Fig. 3 .
2. Disconnect PCV hose from upper intake manifold. Disconnect spark plug wire holders. Evenly loosen 12
upper intake manifold bolts. Remove upper intake manifold. Inspect gaskets and replace as necessary.
NOTE:
For non-gasoline bi-fuel or CNG specific component removal and installation
procedures, see one of the following articles:
z
See REMOVAL & INSTALLATION - F150 PICKUP - CNG article.
z
See REMOVAL & INSTALLATION - F150 PICKUP - BI-FUEL -
CNG/GASOLINE article.
z
See REMOVAL & INSTALLATION - F150 PICKUP - BI-FUEL -
GASOLINE/LPG article.
2003 Ford Pickup F150
2003 ENGINE PERFORMANCE Removal & Installation - Blackwood, Expedition, F150 Pickup & Navigator - Gasoline
2003 Ford Pickup F150
2003 ENGINE PERFORMANCE Removal & Installation - Blackwood, Expedition, F150 Pickup & Navigator - Gasoline
Fig. 1: Locating IAC Valve Bolts (4.2L)
Courtesy of FORD MOTOR CO.
2003 Ford Pickup F150
2003 ENGINE PERFORMANCE Removal & Installation - Blackwood, Expedition, F150 Pickup & Navigator - Gasoline
Fig. 2: Locating Accelerator Control Splash Shield (4.2L)
Courtesy of FORD MOTOR CO.
2003 Ford Pickup F150
2003 ENGINE PERFORMANCE Removal & Installation - Blackwood, Expedition, F150 Pickup & Navigator - Gasoline
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст