Ford F150 Pickup. Manual — part 1713
CHARGING SYSTEM
GENERATOR
Service Specifications
GENERATOR SPECIFICATIONS
Torque Specifications
GENERATOR TORQUE SPECIFICATIONS
7/16"
13 (17)
1/2"
17 (23)
Rear Wheel Cylinder Bolt
9-13 (12-18)
Rear Wheel Cylinder Brake Line Fitting
11-14 (15-20)
Rear Backing Plate Bolt
40-50 (54.5-68.1)
Wheel Lug Nut
12mm
100 (135)
14mm
150 (204)
INCH Lbs. (N.m)
Rear Wheel Cylinder Bleeder Screw
62-79 (7-9)
Application
Specification
Generator Amperage Rating
4.2L, 4.6L & 5.4L
110 Amp
Lightning 5.4L SC
120 Amp
Load Test
(1)
With Tester Load
(2)
58 Amps Or More
Without Tester Load
(3)
(4)
No-Load Test
(1)(2)
13-15 Volts
(1)
All tests are performed with engine running at 2000 RPM.
(2)
All accessories off.
(3)
Perform this test with engine running, A/C on, blower motor on high speed, and headlamps on high
beam.
(4)
With accessories on, voltage should increase a minimum of 0.5 volt above base voltage.
Application
Ft. Lbs. (N.m)
Generator Mounting Bolts
4.2L
35 (47)
Except 4.2L
18 (24)
INCH Lbs. (N.m)
2003 Ford Pickup F150
2003 SPECIFICATIONS F150 Pickup
DRIVE BELTS
ADJUSTMENT
Specifications & Procedures
DRIVE BELT ROUTING
Routing Illustrations
Generator Bracket Bolts
89 (10)
Generator B+ Nut
71 (8)
NOTE:
The accessory drive belt has an automatic tensioner and is not adjustable.
2003 Ford Pickup F150
2003 SPECIFICATIONS F150 Pickup
Fig. 1: Drive Belt Routing (4.2L With A/C)
Courtesy of FORD MOTOR CO.
2003 Ford Pickup F150
2003 SPECIFICATIONS F150 Pickup
Fig. 2: Drive Belt Routing (4.2L Without A/C)
Courtesy of FORD MOTOR CO.
2003 Ford Pickup F150
2003 SPECIFICATIONS F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст