Ford Focus RS (2011 year). Manual — part 37
All vehicles
15.
E78706
16.
CAUTION: Make sure that the motor is
in the park position.
Torque: 15 Nm
E119479
x2
x2
x6
G1226165en
501-11-
65
Glass, Frames and Mechanisms
501-11-
65
REMOVAL AND INSTALLATION
Rear Quarter Window Glass — 3-Door/5-Door
Materials
Specification
Name
WSK-M11P57-A3 /
7U7J-T03863-AA
Windscreen Adhesive
Kit - 1 Component
WSS-M11P57-A5
Windshield Adhesive Kit
General Equipment
Adhesive Tape
Direct Glazing Removal/Replacement Equipment
Knife
Laminated Card
Removal
1.
CAUTION:
Description and Operation).
2.
Material: Windshield Adhesive Kit
(WSS-M11P57-A5)
1.
2. Remove the polyurethane (PU) adhesive cap
and heat the 2K-PU adhesive for a minimum
of 30 minutes.
General Equipment: Direct Glazing
Removal/Replacement Equipment
3. Repairs under warranty:
Material: Windscreen Adhesive Kit - 1
Component (WSK-M11P57-A3 /
7U7J-T03863-AA)
TIE0022871
3-door
3.
WARNING: Make sure that the
component paintwork is not damaged.
NOTE: Some resistance may be encountered
when cutting through the glass locating spacers.
General Equipment: Adhesive Tape
General Equipment: Laminated Card
General Equipment: Direct Glazing
Removal/Replacement Equipment
G1240305en
501-11-
66
Glass, Frames and Mechanisms
501-11-
66
REMOVAL AND INSTALLATION
Refer to: Window Glass Health and Safety
Precautions
(100-00 General Information,
E120160
5-door
(501-05 Interior Trim and Ornamentation,
Removal and Installation).
Interior Trim and Ornamentation, Removal
and Installation).
5.
WARNING: Make sure that the
component paintwork is not damaged.
NOTE: Some resistance may be encountered
when cutting through the glass locating spacers.
General Equipment: Adhesive Tape
General Equipment: Laminated Card
General Equipment: Direct Glazing
Removal/Replacement Equipment
G1240305en
501-11-
67
Glass, Frames and Mechanisms
501-11-
67
REMOVAL AND INSTALLATION
Refer to: D-Pillar Trim Panel - 5-Door
(501-05
4.
Refer to: C-Pillar Trim Panel - 4-Door/5-Door
E120156
Installation
1.
NOTE: Minimum 1 mm bead thickness.
General Equipment: Knife
1.
2. NOTE: Make sure that the mating faces are
clean and free of foreign material.
3. NOTE: Touching the adhesive surface will
impair rebonding.
Prepare the rear quarter window glass, rear
quarter window glass flange and trimmed PU
adhesive in accordance with the instructions
supplied with the glass adhesive kit.
E114059
1
2
3-door
2. Apply the activator/ primer in accordance with
the instructions supplied with the glass adhesive
kit.
G1240305en
501-11-
68
Glass, Frames and Mechanisms
501-11-
68
REMOVAL AND INSTALLATION
E120158
3. Apply the activator/ primer in accordance with
the instructions supplied with the glass adhesive
kit.
E120171
4. NOTE: Discard the first 100 mm of adhesive as
this may have a reduced working time.
NOTE: Make sure that any breakage in the
continuous bead of adhesive is overlapped by
20 mm.
General Equipment: Direct Glazing
Removal/Replacement Equipment
Material: Windshield Adhesive Kit
(WSS-M11P57-A5)
Material: Windscreen Adhesive Kit - 1
Component (WSK-M11P57-A3 /
7U7J-T03863-AA)
E120161
8-10mm
G1240305en
501-11-
69
Glass, Frames and Mechanisms
501-11-
69
REMOVAL AND INSTALLATION
5.
Press firmly and evenly into position.
General Equipment: Direct Glazing
Removal/Replacement Equipment
•
•
CAUTION: During the curing time of
the polyurethane (PU) adhesive, the
door windows must be left open.
Using tape, secure the rear quarter window
glass in the correct position until the PU
adhesive has cured.
General Equipment: Adhesive Tape
E120159
5-door
6. Apply the activator/ primer in accordance with
the instructions supplied with the glass adhesive
kit.
G1240305en
501-11-
70
Glass, Frames and Mechanisms
501-11-
70
REMOVAL AND INSTALLATION
E120154
7. Apply the activator/ primer in accordance with
the instructions supplied with the glass adhesive
kit.
E120170
8. NOTE: Discard the first 100 mm of adhesive as
this may have a reduced working time.
NOTE: Make sure that any breakage in the
continuous bead of adhesive is overlapped by
20 mm.
General Equipment: Direct Glazing
Removal/Replacement Equipment
Material: Windshield Adhesive Kit
(WSS-M11P57-A5)
Material: Windscreen Adhesive Kit - 1
Component (WSK-M11P57-A3 /
7U7J-T03863-AA)
E120157
8 -10mm
G1240305en
501-11-
71
Glass, Frames and Mechanisms
501-11-
71
REMOVAL AND INSTALLATION
9.
Press firmly and evenly into position.
General Equipment: Direct Glazing
Removal/Replacement Equipment
•
•
CAUTION: During the curing time of
the polyurethane (PU) adhesive, the
door windows must be left open.
Using tape, secure the rear quarter window
glass in the correct position until the PU
adhesive has cured.
General Equipment: Adhesive Tape
E120155
(501-05 Interior Trim and Ornamentation,
Removal and Installation).
Interior Trim and Ornamentation, Removal
and Installation).
G1240305en
501-11-
72
Glass, Frames and Mechanisms
501-11-
72
REMOVAL AND INSTALLATION
10.
Refer to: C-Pillar Trim Panel - 4-Door/5-Door
Refer to: D-Pillar Trim Panel - 5-Door
(501-05
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст