Ford Focus RS (2011 year). Manual — part 53
8. Disconnect the front door power window
control unit electrical connector.
E39524
9. Raise the front door window glass.
10. Using suitable tape, secure the front door
window glass to the front door.
E42004
11. Disconnect the battery ground cable.
For additional information,
refer to: Battery
Disconnect and Connect
(414-01 Battery,
Mounting and Cables, General
Procedures).
12. Remove the components in the order
indicated in the following illustration(s) and
table(s).
E51757
G413509en
501-14-
103
Handles, Locks, Latches and Entry Systems
501-14-
103
REMOVAL AND INSTALLATION
Description
Item
Exterior mirror interior trim panel
See Removal Detail
1
Front door tweeter speaker electrical
2
Description
Item
connector
Exterior mirror electrical connector (if
equipped)
3
E47359
6
15 Nm
5
15 Nm
23 Nm
4
N
5
N
G413509en
501-14-
104
Handles, Locks, Latches and Entry Systems
501-14-
104
REMOVAL AND INSTALLATION
Description
Item
Door check strap
4
Door hinge retaining bolts
See Removal Detail
5
Description
Item
See Installation Detail
Door
See Removal Detail
6
E52072
8
10
8 Nm
7
8 Nm
13
12
9
11
7
Description
Item
Front door handle, lock and latch retaining
bracket retaining screws
7
Front door latch retaining bolts
8
Front door wiring harness retaining clip
See Removal Detail
9
Front door latch remote control cable
See Removal Detail
10
Description
Item
Front door wiring harness
See Removal Detail
11
Door lock actuator retaining screw
See Removal Detail
See Installation Detail
12
Front door inner panel
See Removal Detail
See Installation Detail
13
G413509en
501-14-
105
Handles, Locks, Latches and Entry Systems
501-14-
105
REMOVAL AND INSTALLATION
E52076
17
18
19
16
15
14
N
Description
Item
Exterior front door latch electrical
connector
14
Front door handle, lock and latch retaining
bracket
See Removal Detail
See Installation Detail
15
Front door latch remote control cable
See Removal Detail
16
Exterior front door handle remote control
cable
See Removal Detail
17
Description
Item
Front door latch retaining bracket retaining
rivet
See Removal Detail
18
Front door latch
See Removal Detail
See Installation Detail
19
13. To install, reverse the removal procedure.
14. Vehicles with global closing, initialize the
door window motors.
For additional information,
refer to: Door
Window Motor Initialization
(501-11 Glass,
Frames and Mechanisms, General
Procedures).
Removal Details
Item 1
Exterior mirror interior trim panel
CAUTION: Do not place excessive strain
on the exterior mirror and front door
tweeter speaker wiring harness.
G413509en
501-14-
106
Handles, Locks, Latches and Entry Systems
501-14-
106
REMOVAL AND INSTALLATION
Item 5
Door hinge retaining bolts
TIE41214
1.
CAUTION: Protect the door using a soft
cloth to prevent damage to the front door.
With the aid of another technician and a
suitable trolley jack, support and detach the
front door from the front door hinges.
Item 6
Door
1. Detach the front door wiring harness from
the A-pillar.
TIE41215
2. Disconnect the front door wiring harness
electrical connector.
TIE41216
3.
CAUTION: After the front door wiring
harness electrical connector has been
disconnected, position the front door back
onto the front door hinges. Failure to follow
this instruction may cause damage to the
front door.
Position the front door onto the front door
hinges.
Item 9
Front door wiring harness retaining clip
1. Detach the front door wiring harness
retaining clip from the front door.
E47330
Item 10
Front door latch remote control cable
1. Using a suitable screwdriver, latch the front
door lock into the closed position.
E52756
2. Detach the front door latch remote control
cable from the front door latch remote
control handle.
1. Operate the door latch remote control handle
lock to the lock position.
2. Release the remote control cable retaining
clips.
G413509en
501-14-
107
Handles, Locks, Latches and Entry Systems
501-14-
107
REMOVAL AND INSTALLATION
3. Detach the inner remote control cable from
the remote control handle lock lever.
E52632
1
2
3
Item 11
Front door wiring harness
1. Detach and push the front door wiring
harness into the front door.
E47360
Item 12
Door lock actuator retaining screw
1. Detach the front door lock actuator.
1. Loosen the door lock actuator retaining
screw.
2. Release the door lock actuator retaining clip.
3. Slide the door lock actuator towards the front
of the vehicle.
E51955
1
2
3
Item 13
Front door inner panel
CAUTION: When removing the front door
inner panel, care must be taken that the
door wiring harness is not trapped or
placed under excessive strain.
Item 15
Front door handle, lock and latch
retaining bracket
1. Press in the centers of the front door handle,
lock and latch retaining bracket retaining clip
locking pins.
E51961
Item 16
Front door latch remote control cable
1. NOTE: Do not kink the front door latch
remote control cable.
NOTE: In order to remove the front door latch
remote control cable from the front door latch lever
the cable must be rotated.
Disconnect the front door latch remote
control cable from the front door latch.
1. Using a suitable screwdriver, release the
front door latch remote control cable locking
tangs from the front door latch.
2. Detach the front door latch remote control
outer cable from the front door latch.
3. Rotate the front door latch remote control
cable.
1
1
2
3
E52633
G413509en
501-14-
108
Handles, Locks, Latches and Entry Systems
501-14-
108
REMOVAL AND INSTALLATION
Item 17
Exterior front door handle remote
control cable
1. NOTE: Do not kink the exterior front door
handle remote control cable.
NOTE: In order to remove the exterior front door
handle remote control cable from the front door
latch lever the cable must be rotated.
Disconnect the exterior front door handle
remote control cable from the front door
latch.
1. Using a suitable screwdriver, release the
exterior front door handle remote control
outer cable locking tangs from the front door
latch.
2. Detach the exterior front door handle remote
control cable from the front door latch.
3. Rotate the exterior front door handle remote
control cable.
E52634
1
1
2
3
Item 18
Front door latch retaining bracket
retaining rivet
1. Using a suitable
hand drill remove
and
discard the door latch retaining bracket
retaining rivet.
Item 19
Front door latch
1. Detach the front door lock actuator from the
front door handle, lock and latch retaining
bracket.
1. Press the front door handle, lock and latch
retaining bracket release clip.
2. Slide the front door handle, lock and latch
retaining bracket out of the front door latch.
E51962
2
1
2. Detach the door lock cylinder actuator rod
from the front door latch.
Installation Details
Item 19
Front door latch
1. Connect the door lock cylinder actuator rod
to the front door latch.
2. Install the front door latch.
• Using
a suitable Rivet gun
install a new front
door latch rivet.
E41506
G413509en
501-14-
109
Handles, Locks, Latches and Entry Systems
501-14-
109
REMOVAL AND INSTALLATION
Item 15
Front door handle, lock and latch
retaining bracket
1. Install the front door handle, lock and latch
retaining bracket to the door inner panel.
2. From the back of the front door handle, lock
and latch retaining bracket press in the
retaining clip locking pins.
E51961
Item 13
Front door inner panel
1. Before installing the front door inner panel
retaining bolts, feed the door wiring harness
electrical connector through the front door
wiring harness hole.
Item 12
Door lock actuator retaining screw
1. Install the front door lock actuator to the
front door.
2. Tighten the front door lock actuator retaining
screw.
Item 5
Door hinge retaining bolts
1. Apply a coating of
adhesive
to the door hinge
retaining bolts.
G413509en
501-14-
110
Handles, Locks, Latches and Entry Systems
501-14-
110
REMOVAL AND INSTALLATION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст