Ford Focus RS (2011 year). Manual — part 34
E50594
5
8 Nm
6
8
7
4
Description
Item
Speaker cover
4
Exterior mirror trim panel
See Removal Detail
5
Door inner panel retaining bolts
6
Description
Item
Door inner panel
See Removal Detail
7
Front door window regulator
See Removal Detail
See Installation Detail
8
7. To install, reverse the removal procedure.
Removal Details
G406261en
501-11-
41
Glass, Frames and Mechanisms
501-11-
41
REMOVAL AND INSTALLATION
Item 2
Door hinge center retaining bolts
1.
CAUTION: Protect the door using a soft
cloth to prevent damage.
With the aid of another technician and a
suitable trolley jack, support the door.
TIE41214
Item 3
Door (left-hand door shown)
1. Detach the electrical connector from the
A-pillar.
TIE41215
2. Remove the front door.
• Disconnect the electrical connector.
TIE41216
3. Push the front door wiring harness into the
door.
E47281
Item 5
Exterior mirror trim panel
1. Detach the exterior mirror trim panel from
the door panel.
1. Detach the clips.
2. Detach the trim panel.
3. Disconnect the speaker electrical connector
(if equipped).
E50107
1
3
2
2. Remove the exterior mirror trim panel.
1. Detach the mirror electrical connector from
the trim panel.
G406261en
501-11-
42
Glass, Frames and Mechanisms
501-11-
42
REMOVAL AND INSTALLATION
2. Disconnect the mirror electrical connector.
TIE40860
2
1
Item 7
Door inner panel
1. Remove the front door latch retaining
screws.
TIE41274
8 Nm
2. Remove the front door latch bracket retaining
screws.
TIE41338
3. Detach the exterior mirror wiring harness
retaining clip.
E47242
Item 8
Front door window regulator
the rivets.
TIE41071
Installation Details
G406261en
501-11-
43
Glass, Frames and Mechanisms
501-11-
43
REMOVAL AND INSTALLATION
1.
Using a suitable electric hand drill
, remove
Item 8
Front door window regulator
1. Align the window regulator with the window
regulator motor retaining screw holes and
rivet holes in the door inner panel.
TIE41069
2. Install the window regulator motor.
E41070
new rivets in a diagonally opposed pattern.
TIE41071
center retaining bolts.
G406261en
501-11-
44
Glass, Frames and Mechanisms
501-11-
44
REMOVAL AND INSTALLATION
3.
Using a suitable
blind rivet gun-hand
, install
Item 2
Door hinge center retaining bolts
1.
Apply a coating of adhesive to the door hinge
Rear Door Window Regulator — Vehicles With: Power Windows
General Equipment
Electric hand drill
Blind rivet gun-hand
1. Remove the rear door window glass.
Door Window Glass - Vehicles With: Power
Windows
(501-11 Glass, Frames and
Mechanisms, Removal and Installation).
2. Remove the rear door window regulator
motor.
Glass, Frames and Mechanisms, Removal
and Installation).
3. Disconnect the power window control switch
electrical connector.
TIE0001851
4. Disconnect the door latch remote control
cable from the door latch remote control.
• Operate the door latch remote control handle
lock to the lock position.
E40720
5. Close the rear door.
6. Detach the wiring harness from the B-pillar.
VUE0026945
7. Disconnect the wiring harness at the B-pillar
and push it into the door.
VUE0026946
8. Open the rear door.
9. Remove the exterior rear door handle.
Latches and Entry Systems, Removal and
Installation).
10. Remove the components in the order
indicated in the following illustration(s) and
table(s).
G296307en
501-11-
45
Glass, Frames and Mechanisms
501-11-
45
REMOVAL AND INSTALLATION
Rear Door Handle
(501-14 Handles, Locks,
Door Window Regulator Motor
(501-11
For additional information,
refer to: Rear
For additional information,
refer to: Exterior
For additional information,
refer to: Rear
E40434
1
8 Nm
2
3
Description
Item
Door inner panel retaining bolts
1
Door inner panel
See Removal Detail
2
Rear door window regulator
See Removal Detail
See Installation Detail
3
11. To install, reverse the removal procedure.
Removal Details
Item 2
Door inner panel
1. Remove the rear door latch retaining screws.
TIE41274
8 Nm
2. Remove the rear door latch bracket retaining
screw.
E41336
G296307en
501-11-
46
Glass, Frames and Mechanisms
501-11-
46
REMOVAL AND INSTALLATION
Item 3
Rear door window regulator
the rivets.
TIE41071
Installation Details
Item 3
Rear door window regulator
1. Align the window regulator with the window
regulator motor retaining screw holes and
rivet holes in the door inner panel.
TIE41072
2. Install the window regulator motor.
E41070
new rivets in a diagonally opposed pattern.
TIE41071
G296307en
501-11-
47
Glass, Frames and Mechanisms
501-11-
47
REMOVAL AND INSTALLATION
3.
Using a suitable blind rivet gun-hand
, install
1.
Using a suitable electric hand drill
, remove
Rear Door Window Regulator — Vehicles With: Manual Windows
General Equipment
Electric hand drill
Blind rivet gun-hand
1. Remove the rear door window glass.
and Mechanisms, Removal and
Installation).
2. Remove the window regulator handle.
TIE0028854
3. Disconnect the door latch remote control
cable from the door latch remote control.
• Operate the door latch remote control handle
lock to the lock position.
E40720
4. Close the rear door.
5. Detach the wiring harness from the B-pillar.
VUE0026945
6. Disconnect the wiring harness at the B-pillar
and push it into the door.
VUE0026946
7. Open the rear door.
8. Remove the exterior rear door handle.
Rear Door Handle
(501-14 Handles, Locks,
Latches and Entry Systems, Removal and
Installation).
9. Remove the components in the order
indicated in the following illustration(s) and
table(s).
G323959en
501-11-
48
Glass, Frames and Mechanisms
501-11-
48
REMOVAL AND INSTALLATION
For additional information,
refer to
:
Exterior
Door Window Glass - Vehicles With
:
Manual Windows
(501-11 Glass, Frames
For additional information,
refer to
:
Rear
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст