Ford Focus RS (2011 year). Manual — part 86
Removal Details
Item 1
Safety belt lower anchor retaining bolt
1. Fold the rear seat cushion forward, to gain
access to the rear safety belt lower anchor
retaining bolt.
Item 2
Safety belt retractor cover
1. Remove the rear safety belt retractor cover.
E48385
Installation Details
Item 4
Safety belt retractor
1.
CAUTION: Make sure the rear safety belt
retractor locating tang is correctly located.
Install the rear safety belt retractor.
E48250
G391263en
501-20A-
14
Safety Belt System
501-20A-
14
REMOVAL AND INSTALLATION
Rear Center Safety Belt Retractor
Materials
Specification
Name
WSK-M5B401-A1
Cleaner
WSK-M2G402-A4
Adhesive
1. Detach the armrest pivot pins from the
armrest retaining bracket on both sides (if
equipped).
1. Pull the outer edge of the armrest backing
panel upwards to gain access to the spring
clip.
2. Using a thin bladed screwdriver, release the
spring clip.
E48657
2
1
2. Remove the armrest (if equipped).
1. Slide the armrest upwards.
2. Slide the armrest outwards.
E48658
2
1
3. Remove the armrest backing panel (if
equipped).
1. Detach the retaining clips from the left hand
rear seat backrest in the sequence shown.
E48659
3
2
1
4
4. Fold the rear seat cushions forwards.
5. Release the rear seat backrest upper latch
on both sides.
6. Fold the rear seat backrests forwards.
7. Release the rear seat backrest from the outer
mounting bracket on both sides.
1. Using a suitable pair of long nose pliers,
depress the clips.
2. Push the clip inwards.
3. Using a suitable screwdriver, release the
locking latch.
E50069
1
1
3
2
8.
CAUTION: The left-hand rear seat
backrest inner pivot pin has radial grooves.
Take care not to damage the right-hand seat
backrest inner pivot bush.
Remove the right-hand rear seat backrest.
1. Detach the outer pivot pin from the mounting
bracket.
G391264en
501-20A-
15
Safety Belt System
501-20A-
15
REMOVAL AND INSTALLATION
2. Detach the right-hand seat backrest from the
left-hand seat backrest.
E50071
2
1
9.
CAUTION: Make sure a webbing retainer
is installed at least 200 mm towards the
safety belt retractor from the webbing stop.
Install the safety belt webbing retainer.
E48648
10.
CAUTION: The bolt securing the safety
belt anchor is held captive by a metal
washer. The bolt, spacer and metal washer
must remain on the safety belt anchor at
all times when the safety belt is detached
or removed.
Remove the rear center safety belt lower
anchor retaining bolt.
E49461
55 Nm
11.
CAUTION: The left-hand rear seat
backrest inner pivot pin has radial grooves.
Take care not to damage the center hinge
pivot bush.
Remove the left-hand rear seat backrest.
1. Detach the outer pivot pin from the outer
mounting bracket.
2. Slide the backrest from the center mounting
bracket.
E50070
1
2
12. Remove the components in the order
indicated in the following illustration(s) and
table(s).
G391264en
501-20A-
16
Safety Belt System
501-20A-
16
REMOVAL AND INSTALLATION
E48255
2
3
4
35 Nm
1
Description
Item
Rear center safety belt retractor upper
anchor retaining bolt
See Removal Detail
See Installation Detail
1
Rear center safety belt webbing trim panel
2
Description
Item
Left-hand backrest cover and pad
See Removal Detail
3
Rear center safety belt retractor
See Removal Detail
See Installation Detail
4
13. To install, reverse the removal procedure.
Removal Details
G391264en
501-20A-
17
Safety Belt System
501-20A-
17
REMOVAL AND INSTALLATION
Item 1
Rear center safety belt retractor upper
anchor retaining bolt
1. Detach the rear seat backrest carpet from
the left-hand rear seat backrest.
E48926
Item 3
Left-hand backrest cover and pad
1. Remove the backrest outer pivot pin bush.
1. Remove the pivot pin bush retaining bolt.
2. Remove the bush.
E50973
2
35 Nm
1
2. Detach the rear seat cover and pad from the
rear seat backrest.
E48254
3. Feed the rear center seat safety belt and
anchor through the reat seat cover and pad.
TIE0003255
4. Raise the rear seat cover and pad to gain
access to the rear center safety belt retractor.
E48733
Item 4
Rear center safety belt retractor
1. Remove the rear seat center safety belt
retractor.
• Release the locking tang.
E50062
Installation Details
G391264en
501-20A-
18
Safety Belt System
501-20A-
18
REMOVAL AND INSTALLATION
Item 4
Rear center safety belt retractor
1.
CAUTION: Make sure the rear center
safety belt retractor locating tang is correctly
located.
Install the rear center seat belt retractor.
1. Locate the locking tang.
2. Install the retaining bolt.
E48256
1
35 Nm
2
Item 1
Rear center safety belt retractor upper
anchor retaining bolt
adhesive from the rear seat backrest.
seat backrest carpet to the rear seat
backrest.
G391264en
501-20A-
19
Safety Belt System
501-20A-
19
REMOVAL AND INSTALLATION
2. Using a suita
ble adhesive, attach the
rear
1.
Using a suitable cleaner
, remove the old
Safety Belt Shoulder Height Adjuster(40 225 0)
Removal
1. Using a thin bladed screwdriver, remove the
B-pillar upper trim panel retaining screws
cover.
E48408
2. Remove the B-pillar upper trim panel
retaining screws.
E48409
3. Locally detach the front and rear door
weatherstrips.
4. Detach the B-pillar upper trim panel from the
B-pillar.
E48410
5.
CAUTION: The bolt securing the safety
belt anchor is held captive by a metal
washer. The bolt, spacer and metal washer
times when the safety belt is detached or
removed.
Detach the safety belt upper anchor from the
safety belt shoulder height adjuster.
TIE39464
35 Nm
6. Remove the safety belt shoulder height
adjuster retaining bolt.
TIE41140
35 Nm
7. Remove the safety belt shoulder height
adjuster.
G167746en
501-20A-
20
Safety Belt System
501-20A-
20
REMOVAL AND INSTALLATION
must remain on the safety belt anchor at all
• Lift the adjuster to detach the locating tangs.
E39465
Installation
1.
CAUTION: Make sure the safety belt
shoulder height adjuster locating tangs are
correctly located.
NOTE: Make sure the safety belt shoulder height
adjuster locking control is correctly located on the
safety belt shoulder height adjuster.
To install, reverse the removal procedure.
G167746en
501-20A-
21
Safety Belt System
501-20A-
21
REMOVAL AND INSTALLATION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст