Hyundai Genesis Coupe (2016 year). Manual — part 11
Features of your vehicle
AUTOMATIC CLIMATE CONTROL SYSTEM (IF EQUIPPED)
■ Type A
1. Temperature control knob
2. AUTO (automatic control) button
3. OFF button
4. Mode selection button
5. Fan speed control button
6. Air conditioning button
7. Front windshield defrost button
■ Type B
8. Rear window defrost button
9. Air intake control button
10. Climate information screen selection
button
OBK042060/OBK042231
4 102
Features of your vehicle
■ Type C
1. Temperature control knob
2. AUTO (automatic control) button
3. OFF button
4. Mode selection button
5. Fan speed control button
6. Air conditioning button
7. Front windshield defrost button
■ Type D
8. Rear window defrost button
9. Air intake control button
10. Climate information screen selection
button
OBK042261L/OBK042262L
4 103
Features of your vehicle
■ Type A, B
■ Type A, B
✽ NOTICE
•
To turn the automatic operation
off, select any button or switch of
the following:
- Mode selection button
- Air conditioning button
- Front windshield defroster but-
ton (Press the button one more
time to deselect the front wind-
shield defroster function. The
OBK042061
OBK042067
'AUTO' sign will illuminate on
■ Type C, D
■ Type C, D
the information display once
again.)
- Air intake control button
- Fan speed control switch
The selected function will be con-
trolled manually while other func-
tions operate automatically.
•
For your convenience and to
improve the effectiveness of the
climate control, use the AUTO
OBK042265L
OBK042263L
button and set the temperature to
Automatic heating and air con-
2. Set the temperature control knob
73°F (23°C).
ditioning
to the desired position.
If the temperature is set to the
1. Press the AUTO button.
lowest setting (LO), the air condi-
The modes, fan speeds, air intake
tioning system will operate contin-
and air-conditioning will be controlled
uously.
automatically by temperature setting.
4 104
Features of your vehicle
Manual heating and air condi-
■ Type A, C
tioning
The heating and cooling system can
be controlled manually by pushing
buttons other than the AUTO button.
In this case, the system works
sequentially according to the order of
■ Type B, D
buttons selected.
When pressing any button except the
AUTO button while using automatic
operation, the functions not selected
OBK049062
will be controlled automatically.
OBK042232
✽ NOTICE
1. Start the engine.
Mode selection
Never place anything over the sen-
2. Set the mode to the desired position.
The mode selection button controls
sor located on the instrument panel
For improving the effectiveness of
the direction of the air flow through
to ensure better control of the heat-
heating and cooling;
the ventilation system.
ing and cooling system.
- Heating:
The air flow outlet port is converted
as follows:
- Cooling:
3. Set the temperature control to the
desired position.
4. Set the air intake control to the
outside (fresh) air position.
5. Set the fan speed control to the
desired speed.
6. If air conditioning is desired, turn
the air conditioning system on.
Press the AUTO button in order to
convert to full automatic control of
the system.
4 105
Features of your vehicle
Type A, C
Floor & Defrost
• Press
(A, C, D)
Most of the air flow is directed to the
floor and the windshield with a small
• Press
amount directed to the side window
defrosters.
Floor-Level (C, A, D)
Type B, D
OBK042065
Most of the air flow is directed to the
floor, with a small amount of the air
Defrost-Level (A, D)
being directed to the windshield and
Most of the air flow is directed to the
side window defrosters.
windshield with a small amount of air
directed to the side window
Bi-Level (B, D, C)
defrosters.
Air flow is directed towards the face
and the floor.
Face-Level (B, D, C)
Air flow is directed toward the upper
body and face with a small amount of
the air being directed to the floor.
Additionally, each outlet can be con-
trolled to direct the air discharged
from the outlet.
4 106
Features of your vehicle
■ Type A, B
Temperature unit conversion
You can switch the temperature
mode between Centigrade to
Fahrenheit as follows;
While pressing the OFF button,
press the AUTO button for 4 seconds
or more.
The display will change from
Centigrade to Fahrenheit, or from
OBK042067
Fahrenheit to Centigrade.
■ Type C, D
OBK042066
If the battery has been discharged or
disconnected, the temperature mode
Instrument panel vents
display will reset to Centigrade.
The outlet vents can be opened or
closed separately using the horizon-
tal thumbwheel. To close the vent,
rotate it to the fully down position. To
open the vent, rotate it up to the
desired position.
Also, you can adjust the direction of
OBK042263L
air delivery from these vents using
the vent control lever as shown.
Temperature control
The temperature control knob allows
you to control the temperature of the
air flowing from the ventilation system.
To change the air temperature in the
passenger compartment, turn the
knob to the right position for warm and
hot air or left position for cooler air.
4 107
Features of your vehicle
Recirculated air position
✽ NOTICE
The indicator light on the
Prolonged operation of the heater in
button is illuminated
the recirculated air position (without
when the recirculated air
air conditioning selected) may cause
position is selected.
fogging of the windshield and side
With the recirculated air position
windows and the air within the pas-
selected, air from the passenger
senger compartment may become
compartment will be drawn through
stale.
the heating system and heated or
In addition, prolonged use of the air
cooled according to the function
conditioning with the recirculated
selected.
air position selected will result in
OBK042104
excessively dry air in the passenger
Air intake control
Outside (fresh) air position
compartment.
This is used to select the outside
The indicator light on the
button is illuminated
(fresh) air position or recirculated air
position.
when the outside (fresh)
air position is selected.
To change the air intake control posi-
tion, press the control button.
With the outside (fresh) air position
selected, air enters the vehicle from
outside and is heated or cooled
according to the function selected.
4 108
Features of your vehicle
■ Type A, B
■ Type A, B
WARNING
•
Continued use of the climate
control system operation in
the recirculated air position
may allow humidity to increase
inside the vehicle which may
fog the glass and obscure vis-
ibility.
•
Do not sleep in a vehicle with
OBK042105
OBK042106
the air conditioning or heating
■ Type C, D
■ Type C, D
system on. It may cause seri-
ous harm or death due to a
drop in the oxygen level
and/or body temperature.
•
Continued use of the climate
control system operation in
the recirculated air position
can cause drowsiness or
sleepiness, and loss of vehi-
cle control. Set the air intake
OBK042264L
OBK042266L
control to the outside (fresh)
Fan speed control
Air conditioning
air position as much as possi-
The ignition switch must be in the ON
Press the A/C button to turn the air
ble while driving.
position for fan operation. The fan
conditioning system on
(indicator
speed control knob allows you to
light will illuminate).
control the fan speed of the air flow-
Press the button again to turn the air
ing from the ventilation system. To
conditioning system off.
change the fan speed, turn the knob
to the right for higher speed or left for
lower speed.
4 109
Features of your vehicle
■ Type A, C
■ Type B, D
System operation
Ventilation
1. Set the mode to the
position.
2. Set the air intake control to the
outside (fresh) air position.
■ Type B, D
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the
desired speed.
OBK042233
OBK042234
Heating
OFF mode
Climate information screen selec-
tion
(if equipped)
1. Set the mode to the
position.
Press the OFF button to turn off the
air climate control system. However,
Press the climate information screen
2. Set the air intake control to the
you can still operate the mode and
selection button to display climate
outside (fresh) air position.
air intake buttons as long as the igni-
information on the screen.
3. Set the temperature control to the
tion switch is in the ON position.
desired position.
4. Set the fan speed control to the
desired speed.
5. If dehumidified heating is desired,
turn the air conditioning system
on.
• If the windshield fogs up, set the
mode to the
or push the front
defrost button (
).
4 110
Features of your vehicle
Operation Tips
Air conditioning
✽ NOTICE
•
To keep dust or unpleasant fumes
HYUNDAI Air Conditioning Systems
•
When using the air conditioning
from entering the car through the
are filled with environmentally friendly
system, monitor the temperature
ventilation system, temporarily set
R-134a refrigerant.
gauge closely while driving up
the air intake control to the recircu-
hills or in heavy traffic when out-
1. Start the engine. Push the air con-
lated air position. Be sure to return
side temperatures are high. Air
ditioning button.
the control to the fresh air position
conditioning system operation
2. Set the mode to the
position.
when the irritation has passed to
may cause engine overheating.
keep fresh air in the vehicle. This
3. Set the air intake control to the
Continue to use the blower fan but
will help keep the driver alert and
outside air or recirculated air posi-
turn the air conditioning system
comfortable.
tion.
off if the temperature gauge indi-
•
Air for the heating/cooling system
4. Adjust the fan speed control and
cates engine overheating.
temperature control to maintain
•
When opening the windows in
is drawn in through the grilles just
ahead of the windshield. Care
maximum comfort.
humid weather air conditioning
may create water droplets inside
should be taken that these are not
blocked by leaves, snow, ice or
the vehicle. Since excessive water
droplets may cause damage to
other obstructions.
electrical equipment, air condi-
•
To prevent interior fog on the wind-
tioning should only be run with
shield, set the air intake control to
the windows closed.
the fresh air position and fan speed
to the desired position, turn on the
air conditioning system, and adjust
the temperature control to desired
temperature.
4 111
Features of your vehicle
Air conditioning system operation tips
•
When using the air conditioning
system, you may notice clear water
Outside air
•
If the vehicle has been parked in
dripping (or even puddling) on the
direct sunlight during hot weather,
ground under the passenger side
Recirculated
open the windows for a short time
of the vehicle. This is a normal sys-
air
to let the hot air inside the vehicle
tem operation characteristic.
escape.
•
Operating the air conditioning sys-
•
To help reduce moisture inside of
the windows on rainy or humid
tem in the recirculated air position
provides maximum cooling, how-
days, decrease the humidity inside
Blower
the vehicle by operating the air
ever, continual operation in this
Heater core
mode may cause the air inside the
Climate control
Evaporator
conditioning system.
air filter
core
vehicle to become stale.
1LDA5047
•
During air conditioning system
•
During cooling operation, you may
Climate control air filter
operation, you may occasionally
notice a slight change in engine
occasionally notice a misty air flow
The climate control air filter installed
speed as the air conditioning com-
because of rapid cooling and
behind the glove box filters the dust
pressor cycles. This is a normal
humid air intake. This is a normal
or other pollutants that come into
system operation characteristics.
system operation characteristic.
the vehicle from the outside through
•
Use the air conditioning system
the heating and air conditioning sys-
every month, even if only for a few
tem. If dust or other pollutants accu-
minutes, to ensure maximum sys-
mulate in the filter over a period of
tem performance.
time, the air flow from the air vents
may decrease, resulting in moisture
accumulation on the inside of the
windshield even when the outside
(fresh) air position is selected. If this
happens, have the climate control
air filter replaced by an authorized
HYUNDAI dealer.
4 112
Features of your vehicle
✽ NOTICE
Checking the amount of air
conditioner refrigerant and
WARNING
• Replace the filter according to the
Maintenance Schedule.
compressor lubricant
Because the refriger-
If the car is being driven in severe
ant is at very high
When the amount of refrigerant is
conditions such as dusty or rough
pressure, the air con-
low, the performance of the air con-
roads, more frequent filter inspec-
ditioning
system
ditioning is reduced. Overfilling also
tions and changes are required.
should only be serv-
has a negative impact on the air con-
• When the air flow rate suddenly
iced by trained and certified
ditioning system.
decreases, the system should be
technicians. It is important that
Therefore, if abnormal operation is
checked at an authorized
the correct type and amount of
found, have the system inspected by
HYUNDAI dealer.
oil and refrigerant is used, oth-
an authorized HYUNDAI dealer.
erwise damage to the vehicle
and personal injury may occur.
4 113
Features of your vehicle
WINDSHIELD DEFROSTING AND DEFOGGING
•
For maximum defrosting, set the
■ Type A, B
WARNING - Windshield
temperature control to the extreme
heating
right/hot position and the fan speed
control to the highest speed.
Do not use the
or
posi-
tion during cooling operation in
•
If warm air to the floor is desired
extremely humid weather. The
while defrosting or defogging, set
difference between the temper-
the mode to the floor-defrost posi-
ature of the outside air and that
tion.
of the windshield could cause
•
Before driving, clear all snow and
the outer surface of the wind-
ice from the windshield, rear win-
shield to fog up, causing loss of
dow, outside rear view mirrors, and
visibility. In this case, set the
OBK042107
all side windows.
mode selection button to the
■ Type C, D
•
Clear all snow and ice from the
position and fan speed con-
hood and air inlet in the cowl grill to
trol knob to the lower speed.
improve heater and defroster effi-
ciency and to reduce the probabili-
ty of fogging up the inside of the
windshield.
OBK042269L
Manual climate control system
To defog inside windshield
1. Set the fan speed to the desired
position.
2. Select desired temperature.
4 114
Features of your vehicle
■ Type A, B
3. Press the defrost button (
).
3. Press the defrost button (
).
4. The outside
(fresh) air will be
4. The outside (fresh) air and air con-
selected automatically. If the
ditioning will be selected automat-
position is selected, air condition-
ically.
ing will also be selected automati-
If the
position is selected, lower
cally.
fan speed is adjusted to a higher fan
If the air conditioning and/or outside
speed.
(fresh) air position are not selected
automatically, press the correspon-
ding button manually.
OBK042108
■ Type C, D
OBK042270L
To defrost outside windshield
1. Set the fan speed to the highest
(extreme right) position.
2. Set the temperature to the
extreme hot position.
4 115
Features of your vehicle
■ Type A, B
2. Select desired temperature.
■ Type A, B
3. Press the defrost button (
).
4. The air conditioning will be turned
on according to the detected
ambient temperature and outside
(fresh) air position will be selected
automatically.
If the air conditioning and outside
(fresh) air position are not selected
automatically, adjust the correspon-
ding button manually. If the
posi-
OBK042072
OBK042073
tion is selected, lower fan speed is
■ Type C, D
■ Type C, D
adjusted to a higher fan speed.
OBK042275L
OBK042276L
Automatic climate control sys-
To defrost outside windshield
tem
1. Set the fan speed to the highest
position.
To defog inside windshield
2. Set the temperature to the
1. Set the fan speed to the desired
extreme hot position.
position.
4 116
Features of your vehicle
Defogging logic
■ Type A, B
3. Press the defrost button (
).
4. The air conditioning will be turned
To reduce the possibility of fogging
on according to the detected
up the inside of the windshield, the
ambient temperature and outside
air intake or air conditioning are con-
(fresh) air position will be selected
trolled automatically according to
automatically.
certain conditions such as
or
position. To cancel or return the
If the
position is selected, lower
defogging logic, do the following.
fan speed is adjusted to a higher fan
speed.
OBK042109L
■ Type C, D
OBK042271L
Manual climate control system
1. Turn the ignition switch to the ON
position.
2. Press the defrost button (
).
4 117
Features of your vehicle
3. While holding the air conditioning
■ Type A, B
3. While holding the air conditioning
button (A/C) pressed, press the air
button (A/C) pressed, press the air
intake control button at least
5
intake control button at least
5
times within 3 seconds.
times within 3 seconds.
The A/C display blinks 3 times with
The A/C display blinks 3 times with
0.5 second of interval. It indicates
0.5 second of interval. It indicates
that the defogging logic is canceled
that the defogging logic is canceled
or returned to the programmed sta-
or returned to the programmed sta-
tus.
tus.
If the battery has been discharged or
If the battery has been discharged or
OBK042109L
disconnected, it resets to the defog
disconnected, it resets to the defog
■ Type C, D
logic status.
logic status.
OBK042274L
Automatic climate control system
1. Turn the ignition switch to the ON
position.
2. Press the defrost button (
).
4 118
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст