Skoda Rapid Spaceback (2019 year). Instruction — part 6
Left control dial for switching Infotainment on and off; volume adjustment
Control dial for calls and confirmations
- Radio menu
- Media menu
- Telephone menu
- Voice control
- Navigation menu
» page 140
- Target-oriented traffic information
- Vehicle system settings
Overview of Infotainment menu
Touch screen
Description – Infotainment Swing
Fig. 121 Infotainment Swing
Left control dial for switching Infotainment on and off; volume adjustment
Control dial for calls and confirmations
- Radio menu
- Media menu
Depending on equipment fitted:
▶
- Telephone menu
▶
Muting
- Infotainment settings
1
2
3
4
5
6
7
8
9
1
2
3
4
Depending on equipment fitted:
▶
- Menu SmartLink (Press) / turn on / off the voice control function
SmartLink (hold)
▶
- Sound settings
- Vehicle system settings
Touch screen
SD card slot
Description – Infotainment Blues
Fig. 122 Infotainment Blues
Dial (hereinafter only symbol )
Display
SD card slot
Switches Infotainment on/off
Radio menu
/ Select radio frequency range
Media menu
Settings of the selected menu (Radio
/Media
)
Infotainment settings
- Sound settings
Backward / forward movement / settings of the selected menu item
values
Function keys (each of the functions for these keys is described in the
relevant chapters)
5
6
7
8
1
2
3
/
-
92
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
External module
Applies to Infotainment Amundsen.
Fig. 123
External module: Infotainment
Amundsen
The external module is located in the storage compartment on the front pas-
senger side
.
SD1 card slot
SD2 card slot
Touch screen
The Infotainment can be operated by lightly touching the screen with your
fingers.
The brightness level of the screen can be set by
or
To protect the screen, a suitable protective film for touch screens can be used.
The screen can be cleaned with a soft cloth and pure spirit if necessary.
1
2
Infotainment operation
Infotainment operation
Screen areas
Applies to Infotainment Columbus, Amundsen.
Fig. 124
Screen areas
Description of the display
Status line with time and outdoor temperature data and other information
Information and operation of the current menu
Function surfaces of the current menu
Operation principles
Applies to Infotainment Columbus, Amundsen.
Fig. 125
Screen display
Description of the display
Name of the current menu
Return to the higher-level menu
A
B
C
A
B
93
Infotainment operation
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Scroll symbol – you can move in the menu by moving your fingers up or
down on the scroll symbol
Menu item with “checkbox”
▶
- Function is switched on
▶
- Function is switched off
Opens a sub-menu of the menu item with a “pop-up window”
Function surfaces
The screen areas which confirm a function or a menu are called “function sur-
faces”.
▶
White text – the surface is active and thus selectable
▶
Grey text – the surface is inactive and therefore not selectable
▶
Green frame – currently selected surface
Selecting a menu/menu item/function
▶
Drag your finger over the screen in the required direction.
▶
By moving your finger over the scroll bar
▶
By turning the dial .
Confirming a menu/menu item/function
▶
By tapping on the function surface.
▶
By pressing the dial .
Returning to higher-level menu
▶
By tapping on the function surface .
▶
By tapping on the screen outside of the “pop-up window”.
▶
By pressing the corresponding button next to the screen (e.g. in the menu
Media, by pressing the
button).
Selecting a menu item/function value
▶
- Selected menu item/function value
▶
- Deselected menu item/function value
Setting a value
▶
By tapping on the function surface or the bottom of the screen.
▶
By touching or moving your finger over the scale.
▶
By turning the dial .
Note
Depending on the equipment, the Infotainment can also be operated by means
of the buttons on the multifunction steering wheel. Further information
.
C
D
E
Operating principles and display areas
Applies to Infotainment Blues.
Fig. 126
Display
Description of the display
Total number of menu items for each setting
Position of the current menu item
Name of the current menu item
Go to previous menu item value
Go to next menu item value
Current menu item value
Setting a value
The desired value of the selected item will be set to one of the following ways.
▶
By pressing button
or
.
▶
By turning the dial .
Exit setting
To exit setting, press one of the buttons
-
.
If the device is not being operated, the display switches off after a few sec-
onds in the last selected mode of (Radio or Media).
A
B
C
D
E
F
94
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Operating the menus
Applies to Infotainment Amundsen.
Fig. 127 Operating the menus
Operating the menus
Browsing the menu, list entries
Expand/reduce the menu window
Open / close the menu window
Close the menu window
Alphanumeric keyboard
Applies to Infotainment Columbus, Amundsen.
Fig. 128
Example of the keyboard display
The alphanumeric keyboard is used to enter letters, numbers and characters.
A
B
C
Description of the alphanumeric keyboard
Input line
Context-dependent:
▶
- Toggle upper case to lower case and vice versa
▶
- Switch to special characters
▶
- Switch to numbers
Context-dependent:
▶
- Switch to numbers
▶
- Switch to Latin letters
▶
- Switch to Cyrillic letters
- Display of visited entries (the number of visited entries is displayed in the
function surface)
Erase the entered characters
Hold to display the variants of the respective letters.
Switch between keyboards with specific characters of the selected
languages
or
Space
Move the cursor within the input line to the left
Move the cursor within the input line to the right
Confirmation of the entered characters
Search
While entering characters, a search is made for corresponding entries.
The entry to be searched for (such as a telephone contact) must be entered
along with any special characters (diacritics).
By tapping on the function surface a list of matching entries opens.
Switching Infotainment on/off
Applies to Infotainment Amundsen, Swing, Blues
›
To switch Infotainment on/off, press
.
Automatic switch-on of Infotainment
If Infotainment was not switched off with
before the ignition was switched
off, it will automatically switch on when the ignition is switched on.
Automatic switch-off of Infotainment
If the vehicle key is pulled out of the ignition lock while Infotainment is switch-
ed on, Infotainment will switch off automatically.
A
B
C
95
Infotainment operation
-------------------------------------------------------------------------------------------------------------------------------------------------------------
If the vehicle is fitted with the starter button, Infotainment will switch off au-
tomatically after the engine is switched off and the door is opened.
With the ignition off, Infotainment will automatically switch off after about 30
minutes.
Infotainment switches off automatically under certain circumstances. Infotain-
ment informs you of this via a text message on the Infotainment display.
Infotainment restart
If Infotainment stops responding (if it “freezes”), it can be restarted by press-
ing and holding
for longer than 10 s (does not apply to Infotainment Blues).
Show time and date on the screen
Applies to Infotainment Columbus, Amundsen.
Standby mode
With the ignition on and infotainment off (Standbymode), it is possible to dis-
play the time and date on the Infotainment screen.
Applies to Infotainment Amundsen
▶
To switch the time and date display on/off, press the
button, then tap
the function surface → Screen Show clock in standby mode.
The display mode can be changed by finger motion across the screen side-
ways.
Applies to Infotainment Swing
▶
To switch the time and date display on/off, press the
button, then tap
the function surface Screen → Show clock in standby mode.
"Screen off" mode
With the ignition on and functions Switch off screen (in 10 seconds) and Display clock
when screen is off
enabled, it is possible to display the time and date
when the Infotainment screen is switched off.
The display type depends on the display mode selected in standby mode (does
not apply to the Infotainment Swing).
Adjusting the volume
Every change in volume is displayed on the screen.
Applies to Infotainment Amundsen, Swing
›
To increase the volume, turn the controller
clockwise.
›
To decrease the volume, turn the controller
anticlockwise.
›
To mute, turn the controller
anticlockwise to 0.
›
or: To activate/deactivate the mute setting, press the button
(applies
to Infotainment Swing).
Applies to Infotainment Blues
›
To increase the volume, turn the control switch
1
clockwise.
›
To decrease the volume, turn the control switch
1
anticlockwise.
›
To mute, turn the controller
1
anticlockwise to 0.
The following symbol appears on the screen when the sound is muted .
If, at the time of muting, sound is being played from a source in the Media
menu, then the playback is stopped.
CAUTION
■
High volumes can cause sound resonance in the vehicle.
■
When changing or connecting an audio source, this may cause sudden
changes in volume. Reduce the volume before changing or connecting an au-
dio source.
Infotainment menus
Applies to Infotainment Amundsen.
Fig. 129
Overview of Infotainment me-
nus: Grid display
96
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Fig. 130
Overview of Infotainment me-
nus: List
›
To display the overview of Infotainment menus, press the
button.
›
To set the display mode, press the button
, then tap the function surface
→ Screen → Menu:.
›
Select the Grid display
or Horizont. Display
option.
Overview of Infotainment menus
Radio menu
Media menu
“ŠKODA Connect” Online Services
SmartLink menu
With a connection established to an external device, the actual connec-
tion is shown instead of a symbol
▶
Android Auto
▶
Apple CarPlay
▶
MirrorLink®
Telephone menu
Vehicle system settings
Navigation menu
(Applies to Infotainment Amundsen)
List of traffic reports (TMC) (applies to Infotainment Amundsen)
Media Command menu (Applies to Infotainment Amundsen)
Images menu
- Sound settings
Infotainment settings
Configuration wizard
Applies to Infotainment Columbus, Amundsen.
The configuration wizard is automatically displayed if there are at least two
non-selected menu items after turning on the Infotainment.
›
For instruction display in Infotainment Amundsen, press the
button, then
tap on the function surface → Configuration wizard.
›
For instruction display in Infotainment Swing, press the
button, then tap
the function surface Configuration wizard.
The Configuration wizard allows you to set the following menu items in se-
quence.
Time and date format
Storing the radio station with the strongest reception signal at present
Pairing and connecting a telephone to the Infotainment system
Home address (applies to Infotainment Amundsen)
Setting “ŠKODA Connect” online services
The selected menu item is marked with the
symbol.
Operating using an application in the external device
Applies to Infotainment Amundsen, Swing.
Some Infotainment functions can be operated using an application in the sup-
ported external device.
For the complete functionality of the application, data transmission from ex-
ternal devices must be activated and, if necessary, operation of the Infotain-
ment via the application must be approved.
Applies to Infotainment Amundsen
›
Activate data transfer in Infotainment. To do this, press the
button and
then tap function surface → Mobile device data transfer → Activate data transfer
for ŠKODA Apps.
›
Release Infotainment operation using the application. To do this, press the
button and then tap function surface Tap→ Mobile device data transfer →
Operation via apps: → Confirm/Allow .
›
Connect Infotainment to an external device via WLAN
›
In the external device, launch an application for Infotainment operation (e.g.
ŠKODA Media Command).
97
Infotainment operation
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Applies to Infotainment Swing
›
Activate data transfer in Infotainment. Press the
button and then tap on
the function surface Activate data transfer for ŠKODA apps.
Note
The description of Infotainment operation using ŠKODA Media Command is
part of the application.
Voice control
Introduction to the subject
Applies to Infotainment Amundsen.
The navigation, telephone, radio and media menus can be operated by voice
commands.
The voice control system can be used either by the driver or by the front pas-
senger.
Function requirements for voice control
Infotainment is switched on.
No telephone call is being made using a telephone connected to Infotain-
ment.
The parking aid is not active.
Requirements for optimum voice command recognition
▶
The voice commands must only be issued when the
symbol is displayed on
the Infotainment screen and the input tone has completely faded.
▶
Speak at your normal volume without intonation and long pauses.
▶
Avoid bad pronunciation.
▶
Close the doors and windows in order to prevent environmental influences
from interfering with the function of the voice control.
▶
You are advised to speak louder at higher speeds, so that the sound of your
voice is not drowned out by the increased ambient noise.
▶
During voice control, limit additional noise in the vehicle, e.g. passengers talk-
ing at the same time.
WARNING
The emergency number should be dialled instructionly. Your voice commands
may not be recognised in such situations. The telephone connection may
not be established or the connection may take too much time to complete.
CAUTION
■
The messages are generated by Infotainment. Flawless clarity (e.g. road or
city name) cannot always be guaranteed.
■
For some Infotainment languages, voice control is not available. Infotainment
indicates this through a text message that is displayed on the screen after set-
ting the Infotainment language.
Note
During voice control, no navigation announcements and traffic announce-
ments are played.
Switching voice control on/off
Fig. 131
Voice control: Main menu
Switch on
›
Press the button on the multifunction steering wheel or button
on
the Infotainment system.
The main menu is displayed
.
Switch off
›
Press the button twice on the multifunction steering wheel or button
on the Infotainment system.
›
or: Issue the voice command “End voice control”.
98
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Operation principle
Fig. 132
Example of screen display
The voice control main menu
on page 98 contains basic voice com-
mands for the individual menus.
Other voice commands are displayed by tapping the respective function sur-
face, if required, by issuing the name of respective command (e.g. navigation).
The screen shows the following
.
Context-dependent:
▶
The system is waiting for a voice command
▶
The system recognises a voice command
▶
The system plays a message
▶
Voice command entry was stopped
Available list entries
Possible voice commands
Displaying other possible voice commands
Voice commands that can be issued are indicated in “quotation marks”.
Note
Depending on the equipment, the voice control symbols
A
displayed on the display of the instrument cluster.
A
B
C
Voice commands
Enter
The voice commands must only be issued when the
symbol is displayed
on the Infotainment screen and the input tone has completely faded. The in-
put tone can be switched on/off. To do this, press
and then tap on →
Voice control.
It is not necessary to wait for the end of message playback when Infotainment
is playing a message. The Infotainment message can be terminated by pressing
the button
or button on the multifunction steering wheel. Then a voice
command can be issued. Voice control is much faster as a result.
Stop
This allows more time to enter the voice command (e.g. in the list of retrieved
contacts).
The process for entering voice commands can be stopped by moving a finger
up/down across the screen or by turning the controller .
When stopping, the symbol changes from
to .
Restore
The procedure for entering voice commands can be restarted in one of the fol-
lowing ways.
▶
By tapping on the function surface .
▶
By pressing the button
on the Infotainment.
▶
By pressing the button on the multifunction steering wheel.
Not recognising a voice command
If a voice command is not recognised by the Infotainment system three times
in succession, then voice control is stopped.
Correction of a voice command input
A voice command can be corrected, modified or re-entered by pressing the
button
or the button on the multifunction steering wheel. However,
this is only possible as long as the
symbol is displayed on the screen.
You do not have to wait until the voice command is recognised by Infotain-
ment.
99
Infotainment operation
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Voice commands can be used during voice control
Voice command
Function
“Back”
Return to the previous menu
“Help”
Reproduce and display possible voice commands
Voice commands that can be used while browsing the list entries
Voice command
Function
“Next page”
Browse menu/list/directory
“Previous page”
“First page”
“Last page”
Additional Information
Navigation
To the destination, you are first required to issue the command“enter ad-
dress” and then follow Infotainment instructions.
It is not necessary to spell city and street names if the entered destination is
located in a country that has no voice control available for the language.
Online POI search
When “Infotainment Online”
services are activated, a POI search can
also be carried out online by issuing the voice command “Find online POI”.
Radio
In order for a radio station can be selected using voice command, the station
must be stored in the list of available stations
or in the preset list
.
Updating the Infotainment software
Fig. 133
Available software updates on
the ŠKODA websites
The software update ensures optimum operation of Infotainment (e.g. com-
patibility with new telephones).
Information on Infotainment compatibility can be found on the following
ŠKODA Internet pages. This is done by scanning the QR code
tering the following address into the web browser.
http://go.skoda.eu/updateportal
Applies to Infotainment Amundsen
▶
To determine the software version, press the
button then tap the func-
tion surface → System information.
▶
To start the software update, press the
button, then tap the function
surface → System information → Update software.
Applies to Infotainment Swing
▶
To determine the software version, press the
button, then tap the Sys-
tem information function surface.
▶
To start the software update, press the
button, then tap the System in-
formation → Update software function surface.
100
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Infotainment settings - Amundsen
Infotainment system settings
Sound settings
›
Press the
button, then tap on function surface .
■
Volume - Volume settings
■
Radio announcements - Volume adjustment of traffic announcements (TP)
■
Navigation announcements - Volume setting for navigation announcements
■
Voice control - Volume setting for voice output
■
Maximum switch-on volume - Set the maximum volume when switching on In-
fotainment
■
Speed dependent Speed-dep. vol.adjust. - Increases the volume as speed increa-
ses
■
Bluetooth audio: - Volume setting of the device connected via Bluetooth
®
au-
dio profile of the connected external device
■
Quiet - Low volume
■
Medium - Medium volume
■
Loud - High volume
■
Entertainment fading while parking - Lowers the audio volume (e.g. radio volume)
when the parking aid is activated
■
Entertainment fading (Navigation) - Lowers the audio volume (e.g. radio volume)
in the event of a navigation announcement
■
Bass - Mid - Treble - Setting the equalizer
■
Balance - Fader - Sets the balance between left and right, front and rear
■
ŠKODA Surround - Switch surround sound on/off (cannot be used in Radio
mode)
■
Virtual Subwoofer -Switch virtual subwoofer on/off (cannot be used in Radio
mode)
■
Touchscreen tone - Switch audible tone when touching the screen on/off
■
No navigation announcements during calls - Switches the navigation prompts on or
off during a telephone conversation
Display settings
›
Press the
button, then tap on function surface Tap→ Screen.
■
Menu: Setting the Infotainment menu display
■
Horizont. Display - Horizontal display
■
Grid display - Grid display
■
Switch off screen (in 10 seconds) - Enable/disable the automatic power off func-
tion
■
Display clock when screen is off - Time and date display when the screen is
switched off
■
Brightness: - Adjusts the brightness of the screen
■
Touchscreen tone - Switch audible tone when touching the screen on/off
■
Animation when finger near screen - Switch the proximity sensors on/off (when
the function is on the bottom bar with function surfaces will be displayed e.g.
in the main Navigation menu when you move a finger towards the screen)
■
Show clock in standby mode - Time and date displayed on the screen when the
ignition is switched on and Infotainment is switched off
Time and date settings
›
Press the
button, then tap on function surface → Time and date.
■
Clock time source: Time source settings: manual/GPS (applies to Infotainment
Amundsen)
■
Time: - Time settings
■
Summer time - Switches summer time on/off
■
Automatic summer time - Switches the automatic switch to summer time on/off
■
Time zone: - Select the time zone
■
Time format: - Set the time format
■
Date: - Date settings
■
Date format: - Set the date format
Infotainment language settings
›
Press the
button, then tap on function surface → Language.
›
Select the Infotainment language.
In some languages, after selecting the function surface, Female or Male are dis-
played for the choice of Infotainment voice prompts.
Note
■
When a language is selected which does not support voice control, Infotain-
ment will indicate this with a message on the screen.
■
The messages are generated by Infotainment. Flawless clarity (e.g. road or
city name) cannot always be guaranteed.
101
Infotainment settings - Amundsen
-------------------------------------------------------------------------------------------------------------------------------------------------------------
More keypad languages settings
›
Press the
button, then tap on function surface → Additional keypad lan-
guages.
In this menu, a keyboard language set can be added to allow characters other
than those in the currently selected language to be entered.
Unit settings
›
Press the
button, then tap on function surface Tap on→ Units .
■
Distance: - Distance units
■
Speed: - Speed units
■
Temperature: - Temperature units
■
Volume: - Volume units
■
Fuel consumption: - Consumption units
■
Pressure: - Pressure units for tyre pressure
Settings for data transfer
Activated data transfer enables data transfer between the Infotainment sys-
tem and the external device or the operation of some Infotainment functions
using the applications of the external device (e.g. ŠKODA Media Command).
›
Press the
button, then tap on function surface → Mobile device data trans-
fer.
■
Activate data transfer for ŠKODA apps - Switch data transfer on and off
■
Use apps to operate: - Setting Infotainment operation via the applications of the
external device (applies to Infotainment Amundsen)
■
Deactivate - Deactivation of Infotainment operation via an external device
■
Confirm - Infotainment operation with required confirmation
■
Allow - Infotainment operation without required confirmation
Voice control settings
›
Press the
button, then tap on function surface → Voice control.
■
Example commands (Infotainment system) - Turn on/off display of the menu con-
taining voice commands in the Infotainment screen when voice control is ac-
tivated
■
Example commands (instrument cluster) - Turn on/off display of the menu contain-
ing basic voice commands when voice control is activated
■
Voice control session start tone - Activate/deactivate the audible signal when
turning on the voice control
■
Voice control session end tone - Activate/deactivate the audible signal when voice
control ends
■
Input tone in voice dialogue - Activate/deactivate the audible signal for the voice
input
■
End tone in voice dialogue - Activate/deactivate the audible signal for the voice
input
Safe removal of the external device
›
Press the
button, then tap on function surface Remove safely: and select
the external device to be removed.
Reset to factory settings
›
Press the
button, then tap on function surface → Factory settings.
In this menu, all or only selected settings can be restored.
Bluetooth
®
settings
›
Press the
button, then tap on function surface → Bluetooth.
■
Bluetooth - Switch the Bluetooth
®
function on/off
■
Visibility: Switch the visibility of the Bluetooth
®
device for other Bluetooth
®
de-
vices on/off
■
Name: - Changing the name of the Bluetooth
®
device
■
Paired devices - Display the list of paired Bluetooth
®
devices
■
Find devices - Search for available Bluetooth
®
devices
■
Bluetooth audio (A2DP/AVRCP) - Activate/deactivate the ability to connect a
Bluetooth
®
audio device (e.g. MP3 player, tablet etc...)
Wireless settings
Applies to Infotainment Amundsen.
›
Press the
button, then tap on function surface → WLAN.
102
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
■
WLAN - List of available hotspots of external devices
■
WLAN - Switch Infotainment WLAN on/off
■
WPS quick connection (WPS button) - Establish a secure connection to the hot-
spot of the external device using WPS (applies to Infotainment Amundsen)
■
Manual settings - Parameter settings for searching and connecting to the hot-
spot of the external device
■
Network name - Enter the Hotspot name
■
Network key - Access passkey setting
■
Security level: Security setting (WPA2 always set)
■
Connect - Establish a connection
■
Find - Search / Restore the list of available hotspots
■
Mobile hotspot - Infotainment hotspot setting (the symbol displayed with
the number of connected external devices)
■
Mobile hotspot - Switch the Infotainment hotspot on/off
■
WPS quick connection (WPS button) - Establish a secure connection to the Info-
tainment hotspot via WPS (applies to Amundsen)
■
Hotspot (WLAN) settings - Parameter settings for connection to the Infotain-
ment hotspot
■
Security level: Security setting (WPA2 always set)
■
Network key - Input of the access password
■
SSID: ... - Name of the infotainment Hotspots
■
Do not send network name (SSID) -Turn Infotainment hotspot visibility on/off
■
Store - Storage of the parameters set for the Infotainment hotspot
Network settings
Applies to infotainment Amundsen with the connected Carstick device.
›
Press the
button, then tap on function surface → Network.
■
Network settings - Sets the data connection from the associated telephone
service provider (APN settings)
■
Access point name: ... - Setting of the access point name
■
User name: ... - Setting of the user name
■
Password: ... - Password setting
■
Authentication: Sets the check type
■
Normal - Without verification
■
Safe - Verification required
■
Reset Access Point (APN) - Delete the parameters for the network setting
■
Store - Saves the parameters for the network setting
■
Network provider: ... - Selection of the network provider (the menu item is visi-
ble when the SIM card is inserted in the CarStick device)
■
Data roaming - Enable/disable the use of data roaming connection
■
Current connection details - Display of information on data downloaded (tap the
function surface Reset to delete the data information)
■
Data connection: - Usage settings for the data connection (Internet connection)
of the SIM card inserted in the CarStick device
■
Off - Use of the data connection is not possible
■
Ask - Use of the data connection is only possible after it has been confirmed
■
On - Use of the data connection is possible at any time
ŠKODA Connect Online Services settings
›
Press the
button, then tap on function surface → ŠKODA Connect (Online
Services).
■
Services Management - Information on licensing of the respective online serv-
ices and the option to switch them on/off
■
registration - Enter the registration PIN code for online services (in the user
profile on the website ŠKODA Connect Portal receive)
System information
›
Press the
button, then tap on function surface → System information.
The information available will be displayed, for example regarding the Infotain-
ment hardware and software, the Bluetooth
®
software version, the navigation
database version, etc.
›
To Update the Infotainment software, Bluetooth
®
software version, etc., tap
on the function surface Update software.
›
To Update the POI categories created in the user profile on the ŠKODA
Connect Portal website, tap on the function surface Online update.
The information on available software updates is obtained from a ŠKODA part-
ner or from the following ŠKODA Internet pages.
http://go.skoda.eu/updateportal
103
Infotainment settings - Amundsen
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Radio menu settings
Settings for all broadcasting ranges
›
In the main Radio menu, tap the function surface .
■
Sound - sound settings
■
Scan - Automatic playback of short portions of all available stations in the
current frequency range
■
Arrow buttons: - Setting the function of the function surfaces
■
Preset list - Change between stations stored under the preset buttons
■
Station list - Change between all available stations of the selected broadcast-
ing range
■
Traffic program (TP) - Switches TP traffic program on/off
■
Delete presets - Deletes the preset buttons
■
Station logos - Manual management of station logos
■
Radio text - Switches the radio text display (FM and DAB) on and off
■
Advanced settings - Other settings that are different depending on the selected
broadcasting range (FM and DAB)
Advanced settings (FM)
›
Select the FM band in the Radio main menu and tap on the function surface
→ Advanced settings.
■
Autostore station logos- Automatic storage of the station logos
■
Region for station logo: - Setting the region for station logo
■
Automatic frequency control (AF) - Activate/deactivate the search for alternative
frequencies of the station currently being played
■
Radio Data System (RDS) - enable/disable RDS function (receiving additional in-
formation from the station)
■
RDS Regional: Switch on/off automatic tracking of related regional stations
■
Fixed - Maintains the selected regional station continuously. When the sig-
nal is lost, another station must be set manually.
■
Automatic - Auto-selects the station with the best reception at the moment.
If you lose reception in the given the region, Infotainment will automatically
set another available region.
Advanced settings (DAB)
›
In the Radio main menu, select the DAB range and tap on the function sur-
face → Advanced settings.
■
Autostore station logos- Automatic storage of the station logos
■
DAB traffic announcements - Switch DAB traffic announcements on/off
■
Other DAB messages - Switch other announcements on/off (e.g., warnings, re-
gional weather, sports reports, financial news)
■
DAB - DAB station tracking - Activate/deactivate automatic DAB station tracking
on another frequency or in other station groups
■
Automatic DAB - FM switching - Activate/deactivate auto-switching from DAB to
the FM broadcasting range if the DAB signal is lost
Automatic change from DAB to FM
In the event of bad DAB reception, the device tries to find an FM station.
The station name is followed by () while the station is being received on the
FM band. When the corresponding DAB station is received again, the system
automatically switches from FM to DAB.
If a DAB station is also not available in the FM band due to poor reception, In-
fotainment will be switched to mute.
Media menu settings
›
In the main Media menu, tap function surface .
■
Sound - Sound settings
■
Mix/repeat including subfolders - Activate/deactivate the title display including
subfolders
■
Bluetooth - Settings for the Bluetooth
®
function
■
WLAN - WLAN settings (applies to Infotainment Amundsen)
■
Remove safely: - Safe removal of the external device
■
Traffic program (TP) - Switches the traffic program on/off
Image menu settings
›
In the main Images menu, tap on function surface .
■
Image view: - Image view settings
■
Full - Display the maximum image size while retaining the aspect ratio
■
Automatic - Full screen display
■
Display time: - Set the display time for the slideshow
■
Repeat slideshow - Switching the slideshow repeat on/off
104
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Telephone menu settings
›
In the main Telephone menu, tap the function surface .
■
Hands-free telephone - Switching a call to the phone/back to Infotainment (the
menu item is displayed during a call)
■
Select mobile phone - Search for available telephones/list of paired tele-
phones/select telephone
■
Bluetooth - Bluetooth
®
settings
■
User profile - User profile settings
■
Manage favourites - Set the function surfaces for your favourite contacts
■
Mailbox number: - Enter the mailbox phone number
■
Sort by: - Arrangement of telephone contact list
■
Surname - Sort by contact name
■
Forename - Sort by contact's first name
■
Import contacts: - Import telephone contacts
■
Select ring tone - Select the ring tone (depending on the connected tele-
phone)
■
Reminder: Remember your mobile - Turn on/off the warning mode before forget-
ting the phone in the vehicle (if the phone was connected to the device)
■
Show pictures for contacts - Activate/deactivate the display of the images as-
signed to the contacts
■
Conference call - Activate/deactivate conference calls
■
Network - Set the telephone service provider network of the SIM card inser-
ted in the CarStick device (applies to Infotainment Amundsen)
SmartLink+ menu settings
›
In the main SmartLink menu, tap on function surface .
■
Activate data transfer for ŠKODA apps- Activate/deactivate data transfer for
ŠKODA applications
■
MirrorLink® - Settings of the system MirrorLink
®
■
Allow MirrorLink® notification to be shown - Turn the display of Mirror link
®
appli-
cation messages on the Infotainment screen on/off
Navigation menu settings
Route options
›
In the main Navigation menu, tap the function surface → Route options.
■
Suggest 3 alternative routes - Switch the menu for alternative routes on/off (eco-
nomical, fast, short)
■
Route: - Setting the preferred route
■
Most frequent routes - Show/hide the menu of the most frequent routes in the
split screen
■
Dynamic route - Switch on/off dynamic route recalculation due to TMC traffic
reports or online traffic reports
■
Avoid motorways - Activate/deactivate the non-use of motorways in the
route calculation
■
Avoid ferries and motorail trains - Activate/deactivate the non-use of ferries
and motorail trains in the route calculation
■
Avoid toll roads - Activate/deactivate the use of toll roads for route calcula-
tion
■
Avoid tunnels - Switch on/off use of tunnels for route calculation
■
Avoid routes requiring toll stickers - Activate/deactivate the use of routes re-
quiring toll stickers on/off for route calculation
■
Show available toll stickers - Selection of countries for which a valid toll sticker
is required (routes requiring toll stickers are used for route calculation)
■
Include trailer - Turn on / off the setting to take a trailer into account for
route calculation
Map
›
In the main Navigation menu, tap the function surface → Map.
■
Show road signs - Switch the display of traffic signs on/off
■
Lane guidance - Activate/deactivate the display of lane guidance
■
Show favourites - Activate/deactivate the display of favourites
■
Show POIs - Activate/deactivate the display of POIs
■
Select categories for POIs - Select the categories of displayed POIs
■
Show brand logos for POIs - Activate/deactivate the company logos available
for the POIs shown
■
Traffic flow settings - Setting for the display of a traffic obstruction received
from online traffic
■
Display free-moving traffic - Activate/deactivate the display of routes with
free-moving traffic
■
Display congestion - Activate/deactivate the display of routes with heavy traf-
fic
■
Display traffic events (symbols on map) - Activate/deactivate the display of
routes with a traffic incident
105
Infotainment settings - Amundsen
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Manage memory
›
In the main Navigation menu, tap the function surface → Manage memory.
■
Sort contacts: - Setting the configuration of the phone book
■
By surname - Sorting by the contact surname
■
By Forename - Sorting by the contact first name
■
Define home address - Enter the home address
■
Delete "My POIs" - Delete your own POI categories (Personal POI)
■
Update "My POIs" (SD/USB) - Import/update your own POI categories (Personal
POI)
■
Retrieve "My POIs" (online) - Online import/update of your own POI categories
created in the user profile on the ŠKODA Connect Portal website
■
Import destinations (SD/USB) - Import destinations in vCard format
■
Delete user data - Delete user data (by tapping function surface Delete and con-
firming the deletion)
■
Last destinations - Delete the last destinations
■
Dest. memory - Delete the stored destinations
■
Online destinations - Delete the stored online destinations
■
Routes - Delete saved routes
■
My points of interest (Personal POI) - Delete the custom POIs
■
Entered cities - Delete the history of places already entered via the address
■
Home address - Delete the stored home address
■
Flagged destination - Delete the flagged destination
■
Most frequent routes - Delete the most travelled routes
Navigation announcements
›
In the main Navigation menu, tap the function surface → Navigation announce-
ments.
■
Volume - Volume control of the navigation announcements
■
Entertainment fading (Navigation) - Adjust the fading of the audio volume (e.g. ra-
dio volume) when navigation announcements are being made
■
No navigation announcements during calls - Activate/deactivate non-playback of
navigation announcements during a telephone call
■
Note:“My POIs” - Activate/deactivate an audible indication when approaching a
custom POI (if supported by the imported custom POI)
Speed limits
›
In the main Navigation menu, tap the function surface → Speed limits.
The maximum speed limits for the current country are displayed.
When the function is switched on Note:National border crossed
vanced settings, display the country-specific speed limits when crossing inter-
national borders.
Fuel options
›
In the main Navigation menu, tap the function surface → Fuel options.
■
Select preferred fuel station - Select your preferred fuel station brand (the selec-
ted station brand will be displayed in the first three positions of the list)
■
Fuel warning – Activate/deactivate the display of a warning message with the
option to search for the nearest petrol station when the fuel level reaches
the reserve area
Version information
›
In the main Navigation menu, tap the function surface → Version information .
A list of countries is displayed that exist for the navigation data, together with
the date of the last update.
The navigation data can be updated by tapping on the Update function surface
(SD/USB) or Online update.
The information on updating the navigation data can be obtained from a
ŠKODA partner or on the following ŠKODA websites.
http://go.skoda.eu/updateportal
Advanced settings
›
In the main Navigation menu, tap the function surface → Advanced settings.
■
Time display: - Select the time display in the status line
■
- Estimated arrival time at destination
■
Estimated travelling time to the destination
■
Status line: - Selection of the destination type, for which the status line, the
route and travel time are displayed (this also determines which destination
type is displayed on the map after selecting → is displayed on the map)
■
- Route destination
■
- Next waypoint
■
Note:National border crossed - Switching the display of information on country-
specific speed limits when crossing a national border on/off
106
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
■
Demo mode - Activate/deactivate guidance in demo mode
■
Define demo mode starting point - Specify the start point of the route guidance
in demo mode by entering the address or the current vehicle position
Infotainment settings – Swing
Infotainment system settings
Sound settings
›
Press the
or
button, then tap the function surface Sound.
■
Volume - Volume settings
■
Maximum switch-on volume - Set the maximum volume when switching on In-
fotainment
■
Announcements - Adjustment of traffic announcements volume (TP)
■
Speed-dep. vol.adjust. - Volume increases as speed increases
■
Entertainment fading - Lowers the audio volume (e.g. radio volume) with acti-
vated parking aid
■
Entertainment fading (Navigation) - Reduction of audio volume (e.g. radio vol-
ume) for navigation announcements originating from the SmartLink appli-
cation
■
Bluetooth audio: - Volume setting of the device connected via Bluetooth
®
au-
dio profile
■
Balance - Fader - Sets the balance between left and right, front and rear
■
Bass - Mid - Treble - Setting the equalizer
■
Touchscreen tone - Activates/deactivates the acoustic tone when touching the
screen
■
ŠKODA Surround - Switch surround sound on/off (cannot be used in Radio
mode)
■
Virtual Subwoofer -Switch virtual subwoofer on/off (cannot be used in Radio
mode)
Display settings
›
Press the
button, then tap the function surface Screen.
■
Switch off screen (in 10 seconds) - Enable/disable the automatic power off func-
tion
■
Display clock when screen is off - Time and date display when the screen is
switched off
■
Brightness: - Adjusts the brightness of the screen
■
Touchscreen tone - Switch audible tone when touching the screen on/off
■
Show clock in standby mode - Time and date displayed on the screen when the
ignition is switched on and Infotainment is switched off
107
Infotainment settings – Swing
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст