Dacia Solenza (engine E7J). Service manual — part 97
40
GENERAL
40 - 14
Collision diagnosis
REAR LONGITUDINAL GIRDERS CHECKING
Compare the following lengths: EK = FL ; EL = FK .
REAR ARM CHECKING
Compare the following lengths: FM = EN.
If a difference is noticed when measuring the lengths (FM – EN ), the rear arms are to be
replaced.
The checking operation of the rear arms is followed by a checking performed with the gauge
fixed on the arm and on the central longitudinal girder.
40
GENERAL
40 - 15
Collision diagnosis
POWER-TRAIN SUPPORT ASSEMBLY CHECKING
FLOOR FRAME CHECKING
1
2
fig.1
40 - 16
40
Carriage body checking
GENERAL
The checking / straightening bench type CELETTE (service code CAR 500) is composed of
:
- CAR 501 (1 mobile bench with four wheels, four parts for vehicle anchoring, one
traction arm of 10 t, type CAIMAN).
- CAR 502 – set modular cross bars;
- CAR 503 – set of 22 towers MZ;
- CAR 504 - set accessories for traction ;
- CAR 505 - set of specific supports for DACIA Berline, Break.
- CAR 506 - set of specific supports for DACIA 1304, 1307
- CAR 507 - set of specific supports for DACIA Nova/SupeRNova /SOLENZA.
1. CAR 501
The mobile bench (1) is provided with four anchoring parts (2) - (fig 1), which can be used when
a carriage body straightening operation is performed.
pict.3
fig.4
one...
two...
and three!
40 - 17
A
B
C
2
D
A
B
C
1
GENERAL
pict. 2
40
Carriage body checking
To straighten the vehicle body, CELETTE bench is provided with a traction arm of 10
tons, Caiman type, 250-mm stroke of the hydraulic cylinder, with rapid anchorage on any side
of the mobile bench (pict. 2).
2. CROSS BARS MODULAR SET ( CAR 502)
CELETTE bench has in its composition, five modular cross bars (pict.3), as follows:
- two front cross bars A and B (T shaped) which are always in the same position
(towards front of bench) – fig 4 .
- two straight cross bars C1 and C2 and one D cross bar (U-shaped) which may be
placed in different positions subject to the vehicle type.
The marked figures (14…36) are engraved on the mobile bench, every mounting being
supplied with a drawing indicating the exact position of the modular crossbars subject to the
vehicle type.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст