Dacia SuperNova (engine E7J). Service manual — part 91
44
REAR UPPER STRUCTURE
REAR PANEL
44 - 3
DISMOUNTING
Dismount the elements that are in contact
with the rear panel.
Detach the welding points of the rear panel
(1) which are in connection with:
- side panel edge in the area (2);
- side panel ( rear lamps area) in the
area (3);
- side panel in the area (4);
- rear end cross bar in the area (5).
Straighten the areas resulted from
dismounting.
Grind the areas resulted from dismounting.
REMOUNTING
Position and center the new element.
Check the correct positioning of the rear
panel.
Weld the rear panel (1) following the
welding outlines (2), (3) and (4)…;
Protect the welding with a corrosion
preventive product.
Mount in the reverse order the elements
that are in connection with the rear panel.
2
5
4
3
45
TOP OF BODY
ROOF
1. Roof
2 Roof belt
3. Windscreen frame
DISMOUNTING
Dismount the elements, which are in
contact with the roof (front/rear doors,
windscreen, rear glass, roof sealing of the
ceiling and windows gaskets).
Detach the welding points of roof (1) which are in connection with :
- roof belt in the area (4);
- side frame lining in the area (5);
- windscreen lower cross bar in the area (6);
- front pillar in the area (7).
Straighten the areas resulted by dismounting.
Grind the areas resulted by dismounting.
REMOUNTING
Position and center the new element.
Check the correct positioning of the roof.
Weld the roof (1) following the welding outlines (4), (5), (6) and (7).
Mount in the reverse order the elements, which are in connection with the roof.
4
5
6
1
3
2
45 - 01
FRONT / REAR DOOR
47 - 1
47
DISMOUNTING
Dismount the elements, which are in
connection with the front/rear door.
Dismount the attachment screw (1) of the
limiting mechanism of the front/rear door.
Dismount the upper hinge (2) and lower
hinge axles (3) .
REMOUNTING
Perform in the reverse order the
dismounting operations.
LATERAL OPENINGS
48
NON SIDE OPENING ELEMENTS
48 - 1
FRONT BONNET
DISMOUNTING
Dismount :
- the aeration grill;
- the windscreen washer jets and hoses;
- the front bonnet locker (1);
- the safety hook (2);
- the attachment screws (3) of the
hinges;
- front bonet.
REMOUNTING
Perform in the reverse order the dismounting operations.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст