Dacia SuperNova (engine E7J). Service manual — part 92
NON SIDE OPENING ELEMENTS
48
48 - 2
HATCHBACK
DISMOUNTING
Dismount the elements that are in
connection with the hatchback.
Dismount the hatchback attachment ball-
shaped joints (1) and the attachment screws
of the hinges.
Dismount the hatchback.
REMOUNTING
Perform in the reverse order the dismounting operations.
SIDE OPENINGS ELEMENTS MECHANISMS
51
51 - 1
DISMOUNTING
For the dismounting of the front door assembled plate with electric control, dismount:
- the window lifting crank, inner opening mechanism, by detaching from it, the control rod
(8) of the front door opening, the rod which is fixed with the other end on the plate;
- the locking button(2) and the guiding case (3);
- the attachment screw (9) of the locking handle;
- the door panel.
Disconnect the actuator connector. (7)
Dismount the attachment screws (5) of the box (6) from the caisson of the door.
Remove the electric control assembled plate assembly through the technological opening from
the caisson of the door.
Dismount the attachment screws of the outside opening mechanism on the external panel of
the door.
REMOUNTING
Perform in reverse order the dismounting operations, taking into account the following recom-
mendation:
- for the lock control mounting, the lock rod (4) will be placed in the position where the
lock is blocked;
- for the front door plate mounting, the connecting fork (1) of the outside opening mechanism
will be fixed on the existing ball joint on the lock;
mount the button (2) by self-threading on the rod (4).
MECHANISM WITH ELECTRIC CONTROL FOR
FRONT DOOR OUTSIDE OPENING
LOCK AND FRONT DOOR LOCK CYLINDER
SIDE OPENINGS ELEMENTS MECHANISMS
51
51 - 2
DISMOUNTING
For the front door lock dismounting and the outside opening mechanism, beforehand dismount:
- the window lifting crank;
- the arm rest;
- the inside opening mechanism (1);
- the door panel inner ornament;
- the door panel upper ornament, the locking button (5) and the guiding case (4);
- the door panel.
After these operations dismount:
- the lock attachment fork (6) and the lock (11) from the door;
- the front door lock attachment screws (9) on the door caisson;
- the door opening control rod(2) from the lock.
Remove the lock assembly through the technological opening from the door caisson.
Dismount the attachment screws (8) of the outside opening mechanism (7) on the front door
outside panel.
REMOUNTING
Perform in the reverse order the dismounting operations, taking into account the following
mounting instructions:
- for the lock control mounting, the lock rod (3) will be placed in the position where the
lock is blocked;
- introduce the locking rod thought the caisson hole, in the panel guide, then fix it on the
lock by the attachment element;
- mount the button (5) by self-threading on the rod (3);
for the front door lock mounting, the connecting fork (6) of the outside opening mechanism will
be fixed on the existing ball joint on the lock.
11
FRONT DOOR LOCK AND OUTSIDE OPENING MECHANISM
LOCK AND FRONT DOOR LOCK CYLINDER
SIDE OPENINGS ELEMENTS MECHANISMS
51
51 - 3
DISMOUNTING
For the dismounting of the rear door plate with electric control and of the outside opening
mechanism, beforehand dismount:
- the window lifting crank, inner opening mechanism;
- the locking button(8) and the guiding case (7);
- the attachment screw (9) of the locking handle (6);
- the door panel.
Disconnect the actuator connector (3).
Dismount the attachment screws (1) of the box (2) on the caisson of the door, and then detach
an end of the locking rod (4) from the existing ball joint on the plate, and the other end from the
direction change device (5).
Dismount the direction change device (5) by dismounting the assembly attachment nut on the
caisson of the door.
Dismount the attachment screws of the outside opening mechanism on the external panel of
the door.
REMOUNTING
Perform in reverse order the dismounting operations, taking into account the following rec-
ommendation:
- for the direction change device mounting (5), the lock rod will be placed in the position
where the plate is blocked;
- the locking button (8) will be mount by self-threading on the locking rod ;
tighten the screws (1) at the moment of 0,.4 da Nm.
MECHANISM WITH ELECTRIC CONTROL FOR
REAR DOOR OUTSIDE OPENING
LOCK AND REAR DOOR LOCK CYLINDER
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст