SsangYong Rodius (2013 year). Service manual — part 143
02-3
3170-01
Description
Specification
Basic structure
2-shaft, 6-speed (directly connected 4 gears)
Gear ratio
1st
4.489 : 1
2nd
2.337 : 1
3rd
1.350 : 1
4th
1.000 : 1
5th
0.784 : 1
6th
0.679 : 1
Reverse
4.253 : 1
Synchronizer
ring type
1st
T: Triple-cone
2nd
T: Triple-cone
3rd
T: Triple-cone
4th
S: Single-cone
5th
D: Double-cone
6th
S: Single-cone
Reverse
T: Triple-cone
Shifting
Type
Floor change type
Gear selector
lever position
Transmission
fluid
Type
HD MTF 75W/85 (SHELL) or HK MTF 75W/85(SK)
Capacity
2.2 ℓ
Service interval
Inspect and replenish every 60000 km or 3 years (under
severe driving conditions, change every 120,000 km)
1. SPECIFICATION
Reversing:
High-force type
What’s the severe conditions?
Towing a trailer or off-road driving (Inspect the leak of fluid at any time, occasionally)
Taxi, patrol service or delivery service (extended idling and excessive driving with low speed)
Frequent stop-and-go traffic, extended idling, short driving distance
Driving in a hilly or mountainous terrain, sandy, or dusty area
Driving frequently at high speed over 170 km/hour
Driving frequently in area where heavy traffic under the ambient temperature above 30°C
- - -
- - -
02-4
Part No. & Name
Appearance
Description
Part No.:
SSM00203-005
Name:
Main shaft 1st sleeve
installer
Part No.:
SSM00203-006
Name:
Main shaft reverse
sleeve installer
Part No.:
SSM00203-002
Name:
Main shaft 5th
sleeve installer
Part No.:
SSM00203-003
Name:
Oil seal installer
Install the extension housing oil seal
Part No.:
SSM00203-004
Name:
Oil seal installer
Install the control shaft oil seal
2. SPECIAL SERVICE TOOLS
Install the main shaft 1st gear sleeve
Install the drive pinion assembly front ball
bearing
Install the main shaft double angular ball
bearing
-
-
-
Install the main shaft 5th gear sleeve
Install the counter shaft 6th gear sleeve
Install the counter shaft reverse gear
Install the main shaft ball bearing
-
-
-
-
Install the main shaft reverse sleeve and bearing
Install the main drive pinion assembly front ball
bearing
Install the main shaft double angular ball bearing
Install the 3rd & 4th synchronizer hub
Install the main shaft 5th gear
Install the main shaft 6th gear
-
-
-
-
-
-
02-5
3170-01
Part No. & Name
Appearance
Description
Part No.: SSM00203-
001
Name:
Counter shaft
bearing installer
Install the counter shaft front roller bearing
Part No.:
T88310011A-9
Name:
Bearing support
Support the counter shaft when removing the roller
bearing with a puller
02-6
3. TIGHTENING TORQUE
Part name
Tightening torque
(Nm)
Numbers
Adhesive
1. Seal bolt (rolling plunger and guide spring)
53.9~67.6
1 EA
Loctite
2. Guide bolt
14.7~21.5
1 EA
Loctite
3. Pocket ball bearing bolt
29.4~41.1
1 EA
Loctite
4. Reverse shift fork retainer bolt
53.9~67.6
2 EA
Loctite
5. Backup lamp switch
29.4~34.3
1 EA
Loctite
6. Oil drain plug
58.8~78.4
1 EA
Loctite
7. Interlock bolt
14.7~21.5
1 EA
-
8. Neutral switch
29.4~34.3
1 EA
Loctite
9. Oil filler plug
58.8~78.4
1 EA
Loctite
10. Extension housing
42.1~53.9
12 EA
-
11. Concentric slave cylinder bolt
9.8~15.6
3 EA
-
12. Front bearing retainer bolt
19.6~24.5
8 EA
Loctite
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст