SsangYong Korando III (2010 year). Service manual — part 442
03-52
Door ajar warning lamp
▶
7. DOOR AJAR WARNING LAMP CONTROL
When the door ajar signal is input while the vehicle is driven at 10 km/h or less (V2).
The door ajar warning lamp comes on.
A.
B.
Operation 1.
The door ajar warning lamp is ON.
The vehicle is driven at 10 km/h or more (V1) for 2 seconds or longer (T1).
The door ajar warning lamp starts to flash.
C.
D.
E.
Operation 2.
The warning lamp remains on when the vehicle speed decreases to 10 km/h or less (V2).
F.
Operation 3.
(The warning lamp flashes under the condition of operation 2.)
Operation 4.
The door ajar warning lamp flashes.
The lamp goes out when the open door is closed.
The lamp flashes again whenever a door is opened.
G.
H.
I.
The door ajar warning lamp goes out when the open door is closed under the condition stated
above.
-
The door ajar warning lamp goes out when the open door is closed under the condition stated
above.
-
03-53
8710-01
Operating process
- IGN ON
03-54
Seat belt internal buzzer (chime) and warning lamp
▶
The ignition is turned ON from OFF with the driver and passenger seat belts unbuckled.
The internal buzzer (chime) sounds and the warning lamp comes on for 6 seconds (T2).
(internal buzzer controlled by BCM, warning lamp controlled by instrument cluster)
A.
B.
Operation 1.
The ignition is turned ON from OFF with the driver and passenger seat belts unbuckled.
The internal buzzer (chime) does not sound but the warning lamp comes on for 6 seconds (T2).
(The seat belt reminder is operated when the vehicle is driven at 10 km/h (for EU), 25 km/h (for GEN))
C.
D.
Operation 2.
When the fastened driver seat belt is unbuckled with IGN ON.
The internal buzzer (chime) sounds and the driver seat belt warning lamp comes on for T2 again.
E.
F.
Operation 3.
The ignition is turned OFF while the internal buzzer (chime) and seat belt warning lamp are activated.
The internal buzzer (chime) and seat belt warning lamp are deactivated.
G.
H.
Operation 4.
8. SEAT BELT CONTROL
The driver seat belt is fastened while the internal buzzer (chime) and seat belt warning lamp are
activated.
The internal buzzer (chime) does not sound but the warning lamp comes on for the time remaining.
I.
J.
Operation 5.
When the seat belt reminder operation conditions are met during the warning, the seat belt reminder
is operated after stopping the warning output.
For the passenger seat, however, the system detects if the passenger seat is empty or occupied
and operates the warning lamp only for the first time. After that, the only seat belt reminder detects if
the passenger seat is occupied.
-
-
03-55
8710-01
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст