SsangYong Korando III (2010 year). Service manual — part 541
08-5
0000-00
2. TIGHTENING TORQUE
Front suspension assembly
▶
08-6
Rear suspension assembly
▶
08-7
0000-00
1. OVERVIEW
The suspension is the device to connect the axle and vehicle. It absorbs the vibrations and impacts from
road surface, which enhances the comforts, driving force, braking force and drivability.
Underview of vehicle with 2WD, 6M/T
Underview of vehicle with 4WD, 6A/T
Front suspension
Rear suspension
Front suspension
Rear suspension
08-8
1) Front Suspension (Macperson Strut Type)
Front suspension supports the vehicle weight and absorber the vibration from tires. And, in this type of
suspension, the steering linkage tie rod is mounted on the knuckle.
Macperson strut type suspension is the independent suspension which has the spring on the strut
integrated with shock absorber. The lower arm is installed on sub frame and large strut damper is
installed on the knuckle to support the tire. This type of suspension is normally applied to the vehicle with
monocoque body, especially on the front wheel drive type. The upper part with spring is mounted at
body mount and the strut with shock absorber is linked on the steering knuckle.
Advantages
▶
Compact and simple design
Stable wheel alignment
Good load distribution and easy installation
Less effect from tire up/down movement
1.
2.
3.
4.
Disadvantages
▶
Comparatively weak to the impact from road surface and lateral shock due to long strut and single
swing arm
1.
Macperson strut type suspension
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст