SsangYong Stavic / SsangYong Rodius (2005 year). Service manual — part 368
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
FRONT SUSP & AXLE
STAVIC - 2004.09
20
4E
Removal of Sub Frame with Two Colume Lift
1. Since two column type lift does not have supplementary lift, special tool to support the sub frame is required. When
install, apply the special tool with guide pin on the sub frame 3rd cross member and fix the guide bar of special tool
on the 2nd cross member.
Guide bar
Guide bar
3rd cross member
2nd cross member
Guide pin
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
FRONT SUSP & AXLE
STAVIC - 2004.09
21
4E
2. Do the same preceding work to remove the sub frame (page 624 ~ 626).
3. Remove the sub frame mounting bolts (19mm - 6EA)
4. Drop the special tool with sub frame slowly.
Tightening torque
95 ~ 142 Nm
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
FRONT SUSP & AXLE
STAVIC - 2004.09
22
4E
4. FRONT AXLE ASSEMBLY
Preceding Work: 1. Remove the tires.
2. Remove the brake calipers and wheel speed sensors (Fix to the body).
Axle Shaft (Drive Shaft)
Coil spring & shock absorber assembly
Upper arm
Knuckle
Brake caliper
Brake disk
Stablilizer
Power steering assembly
1. Unscrew axle shaft lock nut (30 mm - 1EA) and remove
washer.
[Notice]
•
Axle shaft lock nut can not be reused. Replace it with new
one when reinstall.
•
Keep the tightening torque and cock the nut.
Tightening torque
250 ~ 350 Nm
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
FRONT SUSP & AXLE
STAVIC - 2004.09
23
4E
2. Unscrew the knuckle upper bolt & nut (19mm - 1EA).
3. Remove the knuckle from axle shaft and lay outward.
4. Pull out the axle shaft.
Tightening torque
140 ~ 160 Nm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст