SsangYong Stavic / SsangYong Rodius (2005 year). Service manual — part 224
16
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
CLUSTER / WARNING & INDICATOR PANEL
RODIUS/STAVIC - 2005.07
2B
7. Unscrew four screws and pull out the meter cluster housing.
8. Disconnect the connector and remove the meter cluster housing.
17
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
CLUSTER / WARNING & INDICATOR PANEL
RODIUS/STAVIC - 2005.07
2B
2. Unscrew the screws and pull out the indicator display
housing.
Indicator Display
1. Remove the indicator display cover.
3. Disconnect the connector and remove the indicator
display housing.
3
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
RK STICS
STAVIC - 2004.09
2C
REKES + STICS (RK STICS)
The STICS in this vehicle has similar functions with the one used in other vehicle models. Additional function of diagnos-
ing through SCAN-I has been added into new STICS.
The major difference in hardware-wise is that receives automatic door unlock signal from airbag module through G-
sensor in RK STICS unit when the vehicle has collided over 15 km/h of vehicle speed.
1. COMPONENTS LOCATOR
STICS / ICM module
Air bag ECU
Sends the vehicle collision signals
to STICS.
Installed under the battery. This
horn works only for the theft deter-
rent function, panic function, and
remote starting.
Theft deterrent horn
This diagnosis connector is used for
S T I C S k e y c o d i n g a n d t r o u b l e
diagnosis.
Diagnosis connector
RK STICS
ICM module
This module contains
various relays, chime and
buzzer controlled by STICS
Added the escort and
panic function
REKES
4
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
RK STICS
STAVIC - 2004.09
2C
2. TRANSMITTER CODING
Coding process:
1. Remove the ignition key from key hole.
2. Connect the No. 3 terminal (REKES coding) and No. 16 terminal (battery+) on the diagnosis connector with a
jumper cable.
3. Press any button on the remote control key shortly. (approx. 0.5 sec.)
4. When the coding is successful, turn signal lamps blink once and warning horn sounds once.
5. If the coding has failed, repeat 1 to 4 steps.
Connector pin descriptions
1
3
5
7
9
11
13
15
2
4
6
8
10
12
14
16
-
REKES (for coding)
Signal ground
ECU
Air bag
TCU
TCCU
REKES (for diagnosis)
IG1
Ground
CAN_High
ABS
TGS
FFH (for diagnosis)
CAN_Low
Battery+
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст