SsangYong Stavic / SsangYong Rodius (2005 year). Service manual — part 316
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
84
DC 5-SPEED AUTOMATIC TRANSMISSION
STAVIC - 2004.09
4A
6. Unscrew the center cross member mounting bolts.
B.Side bolts-center cross frame (14 mm - 8 EA)
A.Center bolts-center cross frame (14 mm - 2 EA)
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
85
DC 5-SPEED AUTOMATIC TRANSMISSION
STAVIC - 2004.09
4A
7. Unscrew the T/M insulator bracket bolts and remove the bracket.
8. Unscrew the transfer case mounting bolts (12 mm - 11 EA) and remove the T/C from the T/M.
Tightening torque
20 ~ 25 Nm
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
86
DC 5-SPEED AUTOMATIC TRANSMISSION
STAVIC - 2004.09
4A
9. Remove the torque converter hole cover and unscrew torque converter bolts one by one as rotating the engine crank
shaft clockwise. (14 mm - 6 EA)
○○○○○
○
○
○
○
○
○
○○○○○
Tightening torque
20 ~ 25 Nm
A
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
87
DC 5-SPEED AUTOMATIC TRANSMISSION
STAVIC - 2004.09
4A
10. Unscrew the mission housing bolts and drop the transmission slowly with hydraulic jack (17 mm - 8EA, Tightening
torque: 50 - 60 Nm)
11. Remove the torque converter with special tool.
[Notice]
Be careful not to drop the torque converter
[Notice]
When install the torque converter on the mission, apply
small amount of ATF oil to the input shaft & frange.
[Notice]
• Add the ATF oil and check the oil lever.
• Before reinstallation, clean the T/M and related
components.
12. Install in the reverse order of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст