SsangYong Stavic / SsangYong Rodius (2005 year). Service manual — part 333
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
30
TSM54/52 MANUAL TRANSMISSION
STAVIC - 2004.09
4B
3. Unscrew extension bar - sem remote mounting nut (1) and remove a pin (A) which connects the shifting lever and
extension rod.
Removal and Installation
Preceding work: Disconnect the battery negative cable.
1. Remove the center cup holder assembly (1), shifting lever nob (2) and center console cover (3).
2. Unscrew the shifting lever mounting nut (A) and the shifting lever cover mounting nut (12 mm - 2 EA) (B).
Tightening torque
70 ~ 90 Nm
Installation Notice
Tightening torque
70 ~ 90 Nm
[Notice]
IIf the oil should be changed, remove the oil drain plug in
transmission housing and fully drain the oil. And, retighten
the plug.
Tightening torque
40 ~ 50 Nm
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
31
TSM54/52 MANUAL TRANSMISSION
STAVIC - 2004.09
4B
4. Unscrew 6 bolts at T/M output shaft flange, and fix the
propeller shaft on the body.
5. Disconnect the back up lamp switch connector and air bleeder hose from the T/M assembly.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
32
TSM54/52 MANUAL TRANSMISSION
STAVIC - 2004.09
4B
6. Disconnect the clutch oil hose (Fix the hose with a tool to prevent oil leakage) at “A” marked position.
7. For easier work, unscrew three T/M housing bolts (1) and disconnect stabilizer bar from link (A) to have the
stabilizer bar down to sub frame.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
33
TSM54/52 MANUAL TRANSMISSION
STAVIC - 2004.09
4B
8. Securely support the T/M with a hydraulic jack and then, remove center cross member.
- Center cross member mounting
bolts (A) (14 mm - 8EA)
- T/M mounting insulator bracket
bolts (B) (14 mm - 4EA)
9. Unscrew the T/M housing bolts.
Tightening torque
50 ~ 60 Nm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст