SsangYong Rexton. Service manual — part 67
DI06-17
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
COOLING SYSTEM
DI ENG SM - 2004.4
Y220_06028
Y220_06029
Y220_06030
Y220_06031
Shroud and Cooling Fan/Clutch
Preceding Works:
- Draining of coolant
- Removal of coolant inlet and outlet hose
- Removal of V-belt
1. Remove the radiator grille.
2. Remove the air intake hoses.
3. Set aside the coolant return pipe.
4. Unscrew the upper bolts and loosen the shroud.
5. Lift up the vehicle and remove the skid plate.
6. Loosen the clamp and remove the lower inlet hose.
DI06-18
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
COOLING SYSTEM
DI ENG SM - 2004.4
6. Remove the shroud.
7. Install in the reverse order of removal.
5. Unscrew the center bolt and remove the cooling fan clutch
while holding the pulley with counter holder (special tool).
Installation Notice
Y220_06033
Y220_06034
45 ± 4.5
Nm
Tightening torque
DI06-19
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
COOLING SYSTEM
DI ENG SM - 2004.4
Y220_06035
Water Pump - Assembly
Preceding Works:
- Draining of coolant
- Removal of V-belt
- Removal of shroud
- Removal of cooling fan
1. Thermostat housing
2. Gasket . . . . . . . . . . . . . . ... Replace
3. Bolt . . . . . . . . . . . . . . . . ... 10 Nm
4. Belt pulley
5. Bolt . . . . . . . . . . . . . . . . ... 10 Nm
6. Water pump
1. Remove the V-belt while pressing down the auto tensioner
adjusting bolt.
Y220_06036
DI06-20
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
COOLING SYSTEM
DI ENG SM - 2004.4
2. Unscrew the bolts and remove the EGR pipe and bracket.
Installation Notice
3. Unscrew the bolts and remove the belt pulley while
holding the belt pulley with a special tool.
Installation Notice
4. Remove the oil dipstick tube.
5. Unscrew the bolts and remove the water pump assembly.
Installation Notice
6. Install in the reverse order of removal.
Y220_06037
Y220_06038
Y220_06039
Y220_06040
Tightening torque
23 ± 2.3 Nm
Tightening torque
10 Nm
Tightening torque
10 Nm
Notice
• Replace the O-ring in oil dipstick with new one.
• Plug the oil dipstick hole with a cap not to get the
foreign materials into the engine.
Notice
Remove the gasket residues from the sealing surface
and replace the gasket with new one.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст