SsangYong Rexton. Service manual — part 470
REAR SUSPENSION 2D-9
SSANGYONG Y200
REAR SUSPENSION ASSEMBLY
Removal Procedure
1. Support the rear axle housing bottom safely using
the jack and fix the front wheel as shown.
YAD2D080
YAD2D090
YAD2D100
2. Remove the mounting nut of the lower link
connected the stabilizer bar and separate the
stabilizer bar.
3. Remove the mounting cap bolt retaining both end
of the stabilizer bar and remove the stabilizer bar,
the mounting cap and the bushing.
YAD2D110
4. Remove the upper mounting nut of the link with
the stabilizer bar removed and remove the link.
SSANGYONG Y200
2D-10 REAR SUSPENSION
5. Remove the lateral rod mounting nut by retaining
the frame.
8. Remove the upper nut and remove the shock
absorber
YAD2D120
YAD2D130
YAD2D140
6. Remove the lateral rod mounting nut by retaining
the axle and remove the lateral rod assembly.
7. Remove the lower nut of the shock absorber.
YAD2D150
REAR SUSPENSION 2D-11
SSANGYONG Y200
9. Remove the bolt and nut retaining the frame.
12. Remove the lower arm mounting bolt & nut
retaining the axle and then remove the lower arm.
YAD2D160
YAD2D170
YAD2D180
YAD2D180
10. Remove the upper bolt and nut retaining the axle
and remove the upper arm.
11. Remove the lower arm mounting the frame.
SSANGYONG Y200
2D-12 REAR SUSPENSION
YAD2D210
Installation Procedure
1. Installation should follow the removal procedure
in the reverse order.
2. Be careful to the installation direction of the coil
spring to install the spring correctly.
Notice:
1. Be careful that the diameter of the upper coil
spring is longer than that of the lower’s.
2. Verify that the coil spring should be installed
onto the spring seat of the axle and body(frame)
correctly.
13. Loosen the brake & hose and remove the spring
by pushing to incline the rear axle.
YAD2D190
YAD2D200
14. Remove the mounting nut of the shock absorber
bottom and the upper arm. And then remove the
spring.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст