SsangYong Rexton. Service manual — part 471
REAR SUSPENSION 2D-13
SSANGYONG Y200
3. Insert the upper side of the shock absorber to the
frame and tighten nuts manually. And then install
the lower side’s to the axle and tighten nuts as
specified torque.
Installation Notice
6. Install the lateral rod to both the frame and axle
side.
Installation Notice
YAD2D220
YAD2D230
YAD2D240
YAD2D250
4. Install the upper arm to the frame bracket and the
axle. And then tighten bolts as specified torque.
Installation Notice
5. Install the lower arm to the frame bracket and the
axle. And then tighten bolts as specified torque.
Installation Notice
Tightening Torque(frame(1))
Tightening Torque(axle(2))
165 N•m
165 N•m
Tightening Torque(frame(1))
Tightening Torque(axle(2))
165 N•m
165 N•m
Tightening Torque(frame(1))
Tightening Torque(axle(2))
165 N•m
165 N•m
Upper side (1)
Lower side (2)
Tightening Torque : 30 - 45 N•m
(22 - 33 lb-ft)
Tightening Length : 6 - 9 mm
Tightening Torque : 50 - 65 N•m
(37 - 48 lb-ft)
SSANGYONG Y200
2D-14 REAR SUSPENSION
7. Install the connecting rod to the frame bracket.
Notice: Follow the tightening length for installing
the nut.
Installation Notice
YAD2D260
YAD2D270
8. Install the stabilizer bar to the axle bracket with
the mounting cap and connect the bar with the
connecting rod. And then tighten the mounting cap
bolt and nut as specified torque.
Installation Notice
9. The rubbers installation should follow the
connecting order of the link rubber(packing).
Notice: Always replace a new part when there is
any wear or damage in the lever.
10. Check the shock absorber for any damage, oil
leakage or abnormal noise.
YAD2D280
Tightening Torque
Tightening Length(A)
38 N•m (28 lb-ft)
7 - 12 mm
Tightening Torque
30 - 45 N•m
(22 - 33 lb-ft)
REAR SUSPENSION 2D-15
SSANGYONG Y200
YAD2D290
Notice: For scrapping the gas shock absorber, drill
the hole in the “A” section with the shock absorber full
expansion and discharge the gas.
SSANGYONG Y200
2D-16 REAR SUSPENSION
SPECIAL TOOLS AND EQUIPMENT
SPECIAL TOOLS TABLE
661 589 12 33 00
Rear spring compressor
Torque Wrench
YAD2D300
YAD2D310
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст