SsangYong Rexton. Service manual — part 22
DI01-42
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
ENGINE ASSEMBLY
DI ENG SM - 2004.4
B. Remove the oil filter assembly mounting bolts.
C. Remove the oil filter assembly from the cylinder block.
Installation Notice
- Replace the oil filter gasket with new one.
7. Remove the belt tensioning device.
A. Remove the shock absorber lower mounting bolt.
Installation Notice
B. Remove the shock absorber upper mounting bolt.
Installation Notice
Y220_01066
Y220_01067
Y220_01068
Y220_01069
Notice
Be careful not to flow out the residual oil from the
engine. If flown out, immediately wipe it out.
Tightening torque
25 ± 2.5 Nm
Tightening torque
32 ± 3 Nm
Tightening torque
82 ± 6 Nm
DI01-43
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
ENGINE ASSEMBLY
DI ENG SM - 2004.4
B. Remove the power steering pump assembly from the
engine.
8. Remove the air conditioner compressor assembly.
A. Unscrew the bolts and remove the air conditioner
compressor assembly.
Installation Notice
C. Remove the belt tensioning device.
7. Remove the power steering pump assembly.
A. Remove the power steering pump mounting bolts.
Installation Notice
Y220_01070
Y220_01071
Y220_01072
Y220_01073
Notice
• To prevent the oil leaks, store the removed shock
absorber assembly with standing up.
• For air bleeding, pump the shock absorber around
3 times after installation.
• Be careful not to damage the rubber parts of the
shock absorber when removing.
• To prevent the oil leaks, remove the bolts from bottom
to top section. On the contrary, when installing,
tighten the bolts from top to bottom section.
Tightening torque
25 ± 2.5 Nm
Notice
Be careful not to flow out the oil.
Notice
To prevent the oil leaks, store the removed power
steering pump assembly with standing up.
Tightening torque
25 ± 2.5 Nm
DI01-44
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
ENGINE ASSEMBLY
DI ENG SM - 2004.4
9. Remove the PCV valve assembly.
A. Remove the PCV valve hose.
B. Unscrew the bolts and remove the air conditioner
mounting bracket.
Installation Notice
Y220_01074
Y220_01075
Y220_01076
Y220_01077
Front bolt
Side bolt
25 ± 2.5 Nm
25 ± 2.5 Nm
B. Remove the PCV valve hose connected to the engine
oil hose.
C. Unscrew the PCV valve mounting bolts and remove
the PCV valve assembly.
Installation Notice
Tightening torque
10 ± 1.0 Nm
DI01-45
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
ENGINE ASSEMBLY
DI ENG SM - 2004.4
10. Remove the oil dipstick tube assembly.
Unscrew the bracket bolts and remove the dipstick tube
with O-ring.
Installation Notice
Insert new O-ring into the oil dipstick tube before
installation.
Tightening torque
10 ± 1.0 Nm
Installation Notice
11. Remove the turbo charger assembly.
A. Unscrew the bolts and remove the oil supply pipe.
Installation Notice
B. Unscrew the bolts and remove the oil return pipe.
Installation Notice
• Make sure to install the gasket with correct direction.
Y220_01078
Y220_01079
Y220_01080
Y220_01081
Upper bolt (M19)
Lower bolt (M17)
25 ± 2.5 Nm
20 ± 2.0 Nm
Tightening torque
10 ± 1.0 Nm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст