Jaguar 5HP24 transmission. Service manual — part 30
Screw locating pin 5x46 001 007 into the
pump. Mount the complete pump (in-
cluding intermediate metal sheet 10.016)
over the stator shaft onto the intermediate
plate. Remove the locating pins and fas-
ten tight with 9 machine screws 10.070
and 1 cylinder screw 10.074.
(See Chapter 1.5 for tightening torque)
Note!
Check pump with sleeve 5x56 000 021 to
ensure that it moves freely. The pump
wheels must turn freely and easily.
Attach shim 02.260 to the stator shaft
using petroleum jelly.
Attach seal 10. 024 to the transmission
housing using petroleum jelly.
Put axial needle roller bearing 02.250
over the drive shaft onto clutch B.
3.6/4
97174
97175
97176
Coat the rectangular-section rings on the
drive shaft with some petroleum jelly.
Put the intermediate plate carefully onto
the transmission housing and align it.
Put converter bell housing 22.010 onto
the intermediate plate so that 20 hexago-
nal screws can be screwed in as follows:
- 6 screws: 22.090 (see picture)
35mm long
- 14 screws: 22.100 (rest of the screws)
90mm long
(See Chapter 1.5 for tightening torque)
Important!
Making adjustments: see Chapter 1.4.8
3.6/5
97177
97200
01.140
01.150
/110
/130
03.010
03.030
/120
03.050
01.120
01.370
01.360
01.350
27.470
27.460
27.450
27.280
27.260//118
27.260/116
01.220
01.490
01.490
01.560
01.580
22.020
22.400
22.410
22.430
22.410
27.510
27.520
03.080
3.7
Control unit, oil pan and converter
(complete control unit, see spare parts list, technical cover sheet, position YO2)
3.7/1
5 HP 24
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст