Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 365
4. Remove the TCM.
1. Disconnect the electrical connector.
2. Remove the TCM.
Installation
1. To install, reverse the removal procedure.
Tighten to 10 Nm.
2. Tighten to 10 Nm.
Published: 11-May-2011
Automatic Transmission/Transaxle - Vehicles With: 5-Speed Automatic Transaxle -
JATCO - Transmission Range (TR) Sensor
In-vehicle Repair
Removal
1. Remove the battery tray. For additional information, refer to Section
414-01 Battery, Mounting and Cables
.
2. Disconnect the electrical connector.
1. Detach the electrical connector.
2. Disconnect the electrical connector.
3. Remove the tie strap.
4. Remove the Transmission Range (TR) sensor.
Installation
1. Install the TR sensor.
2. Adjust the TR sensor. For additional information, refer to
Adjustment
—Transmission Range (TR) Sensor
.
Published: 11-May-2011
Automatic Transmission/Transaxle - Vehicles With: 5-Speed Automatic Transaxle -
JATCO - Transaxle
Removal
Special Tool(s)
Slide hammer
100-012
100-012-02
Slide hammer shaft
Halfshaft remover fork
204-226
Powertrain assembly jack
HTJ1200-2
Pinion oil seal remover
308-208
Engine support bracket
303-021
Engine support brackets
303-1068
Disconnect tool, fuel line
310-044
Removal
All vehicles
1. Remove the battery tray.
For additional information, refer to:
Battery Tray
(414-01 Battery,
Mounting and Cables, Removal and Installation).
2. Remove the air cleaner.
For additional information, refer to:
Air Cleaner
(303-12A Intake Air
Distribution and Filtering - 2.0L NA V6 - AJV6/2.5L NA V6 - AJV6/3.0L NA
V6 - AJ27, Removal and Installation).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст