Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 308
4. Tighten to 10 Nm.
Published: 11-May-2011
Intake Air Distribution and Filtering - 2.0L NA V6 - AJV6/2.5L NA V6 - AJV6/3.0L NA
V6 - AJ27 - Intake Air Distribution and Filtering
Description and Operation
Item
Part Number
Description
1
—
Air cleaner outlet pipe
2
—
Air cleaner cover
3
—
Air cleaner element
4
—
Air cleaner
5
—
Air cleaner intake pipe
Published: 11-May-2011
Intake Air Distribution and Filtering - 2.0L NA V6 - AJV6/2.5L NA V6 - AJV6/3.0L NA
V6 - AJ27 - Intake Air Distribution and Filtering
Diagnosis and Testing
Inspection and Verification
1. Verify the customer concern.
1.
2. Visually inspect for obvious signs of mechanical damage.
2.
Visual Inspection Chart
Mechanical
Air cleaner intake pipe
Air cleaner outlet pipe
Air cleaner element
3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next
step.
3.
4. If the cause is not visually evident, verify the symptom and refer to the Jaguar Approved Diagnostic System.
4.
Published: 11-May-2011
Intake Air Distribution and Filtering - 2.0L NA V6 - AJV6/2.5L NA V6 - AJV6/3.0L NA
V6 - AJ27 - Air Cleaner
Removal and Installation
Removal
1. Remove the air cleaner element. For additional information, refer to the
procedure in this section:
Air Cleaner Element
2. Detach the air cleaner intake pipe.
1. Remove the air cleaner intake pipe retaining screws.
2. Detach the air cleaner intake pipe.
3. Remove the air cleaner.
1. Detach the air cleaner from the retaining grommet.
2. Remove the air cleaner.
Installation
1. NOTE: W hen installing the air cleaner, make sure that the locating peg
is installed correctly into the retaining bracket grommet.
To install, reverse the removal procedure.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст