Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 158

48. Position and adjust the special tool engine height adjusters.

49. Remove the engine support bracket.

50. Remove the transaxle mount bracket securing nut.

51. Remove the clutch master cylinder to clutch slave cylinder

high-pressure pipe support bracket.

52. NOTE: Left-hand shown, right-hand similar.

Remove the front subframe reinforcement plate retaining bolts.

53. NOTE: Left-hand shown, right-hand similar.

Remove the front subframe reinforcement plate.

54. NOTE: Left-hand shown, right-hand similar.

Detach the front subframe.

55.

W ARNING: Rotate the special tool height adjustment valve

slowly. Failure to follow this instruction may result in personal injury.

Remove the engine and transaxle assembly.

Rotate the special tool height adjustment valve counter clockwise.

56. Remove the coolant system top hose.

Remove and discard the gasket.

57. Remove the transaxle mount.

58. Install the special tool.

59. Remove the left-hand exhaust manifold heat shield.

60. Install the special tool.

61. Remove the upper exhaust heat shield.

62. Remove the center exhaust heat shield retaining bolts.

63. Remove the center exhaust heat shield.

64. Install the special tool.

65. NOTE: Left-hand shown, right-hand similar.

Remove the front wheel hub retaining nuts.