Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 620
6. Remove the front seat front height adjustment motor.
Remove the retaining bolts.
Installation
1. To install, reverse the removal procedure.
Tighten to 10 Nm.
Published: 11-May-2011
Seating - Front Seat Rear Height Adjustment Motor
Removal and Installation
Removal
1. Remove the front seat.
For additional information, refer to:
Front Seat
(501-10 Seating,
Removal and Installation).
2. Remove and discard the cable tie.
3. Detach the wiring harness.
4. Disconnect the front seat rear height adjustment motor electrical
connector.
5. Remove the front seat rear height adjustment motor roll pin.
6. Remove the trim finisher.
7. Remove the front seat rear height adjustment motor.
Remove the retaining bolt.
Installation
1. To install, reverse the removal procedure.
Tighten to 10 Nm.
Published: 11-May-2011
Seating - Front Seat Recliner Motor
Removal and Installation
Removal
1. Remove the front seat backrest.
For additional information, refer to:
Front Seat Backrest
(501-10
Seating, Removal and Installation).
2. Remove the front seat head restraint.
Press the retaining tangs.
3. Detach the front seat backrest cover.
Detach the retaining strip.
4. Detach the front seat backrest cover tension cords from the front seat
backrest.
5. Detach the front seat backrest cover.
Remove and discard the hog rings.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст