Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 62
6. Tighten to 142 Nm.
7. Install the tie-rod end.
Tighten to 35 Nm.
8. Loosely install a new wheel hub nut.
9. Install the front road wheel and tire.
For additional information, refer to:
Wheel and Tire
(204-04 Wheels and
Tires, Removal and Installation).
10. Tighten the wheel hub nut.
Tighten to 270 Nm.
11. Check the subframe alignment.
For additional information, refer to:
Underbody Misalignment Check
(502-00 Uni-Body, Subframe and Mounting System, General Procedures).
Published: 11-May-2011
Front Drive Halfshafts - Inner Constant Velocity (CV) Joint Boot
Removal and Installation
Removal
1. Remove the front halfshaft. For additional information, refer to
Halfshaft LH
. For additional information, refer to
Halfshaft RH
.
2.
CAUTION: Use suitable protective covers to protect the barshaft.
Using a suitable clamp, secure the front halfshaft.
3. Remove the inner constant velocity (CV) joint boot outer retaining clip.
Remove and discard the retaining clip.
4. Remove the tripod star housing.
Remove and discard the grease.
5. Remove the tripod star circlip.
6.
CAUTION: Do not damage the roller bearings.
Using a suitable brass drift, remove the tripod star.
7. Remove the inner CV joint boot retaining clip.
Remove and discard the retaining clip.
8. Remove the inner CV joint boot.
Installation
1. Install the inner CV joint boot.
2. NOTE: Install a new retaining clip.
Using a suitable tool, install the inner CV joint boot retaining clip.
3.
CAUTION: Do not damage the roller bearings.
Install the tripod star.
4. Install the tripod star circlip.
5. NOTE: Install new grease.
Install the tripod star housing.
6. NOTE: Make sure enough air is present in the CV boot.
• NOTE: Install a new retaining clip.
Using a suitable tool, install the inner constant velocity (CV) joint boot
outer retaining clip.
7. Remove the front halfshaft from the clamp.
8. Install the front halfshaft. For additional information, refer to
Halfshaft
LH
. For additional information, refer to
Halfshaft RH
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст