Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 414

26. Install the engine cover rear mount bracket.

Tighten to 23 Nm.

27. Attach the electrical connector.

28. Attach the engine harness.

All vehicles

29. Remove the special tool.

30. Remove the special tool.

31. Attach the wiring harness to the camshaft cover retaining stud.

Tighten to 6 Nm.

32. Install the intake manifold support bracket.

Tighten to 10 Nm.

33. Attach the electrical connector to the intake manifold support bracket.

34. Attach the PCV hose to the intake manifold.

35. Remove the special tool.

36. Install the air cleaner mount bracket.

Tighten to 6 Nm.

37. Attach the generator wiring harness retaining clip to the camshaft

cover retaining clip.

38. Attach the coolant expansion tank.

1. Reposition the coolant expansion tank.

2. Attach the coolant expansion tank.

39. Install the coolant expansion tank retaining bolt.

Tighten to 3 Nm.

40. NOTE: Remove the blanking plugs from the cooling system vent hoses
and the coolant expansion tank.

Attach the cooling system vent hoses to the coolant expansion tank.

41. Attach the brake fluid low level warning indicator wiring harness to the

coolant expansion tank.

42. Connect the brake fluid low level warning indicator electrical connector.

43. Install the battery tray.

For additional information, refer to:

Battery Tray

(414-01 Battery,

Mounting and Cables, Removal and Installation).

44. Install the air cleaner. For additional information, refer to:

Air Cleaner

(303-12A Intake Air Distribution and Filtering - 2.0L NA

V6 - AJV6/2.5L NA V6 - AJV6/3.0L NA V6 - AJ27, Removal and
Installation),

Air Cleaner

(303-12B Intake Air Distribution and Filtering - 2.0L

Duratorq-TDCi/2.2L Duratorq-TDCi (110kW /150PS) - Puma, Removal
and Installation).