Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 518
Published: 11-May-2011
Parking Aid - Front Parking Aid Speaker
Removal and Installation
Removal
All vehicles
1. Disconnect the battery ground cable.
For additional information, refer to:
Battery Disconnect and Connect
(414-01 Battery, Mounting and Cables, General Procedures).
Vehicles with automatic transmission
2. NOTE: To aid removal of the navigation module and audio unit place the
transmission selector lever in the 'D' position.
Remove the transmission selector lever surround.
Vehicles with manual transmission
3. Detach the gearshift lever surround.
All vehicles
4. Remove the ashtray retaining screws.
5. Remove the ashtray
Disconnect the electrical connectors.
Remove the ashtray.
6. Remove the switch pack trim cover.
7. Remove the retaining screw cover plate.
8. Remove the display mounting bracket upper retaining screws.
9. Remove the display mounting bracket lower retaining screws.
10. Disconnect the electrical connectors.
11. Remove the display module and audio unit.
1. Disconnect the electrical connectors and the fibre optic
connector.
2. Remove the display module and audio unit.
12. Disconnect the front parking aid speaker electrical connector.
13. Remove the front parking aid speaker.
Installation
1. To install, reverse the removal procedure.
2. Connect the battery ground cable.
For additional information, refer to:
Battery Connect
(414-01 Battery,
Mounting and Cables, General Procedures).
Published: 11-May-2011
Parking Aid - Parking Aid Module4-Door
Removal and Installation
Removal
1. Disconnect the battery ground cable. For additional information, refer to
Section
414-01 Battery, Mounting and Cables
.
2. Remove the spare wheel.
3. Disconnect the electrical connector.
4. Remove the parking aid control module.
Installation
1. To install, reverse the removal procedure.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст