Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 297
7. Detach the wiring harness retaining clips from the wiring harness
support bracket.
8. Remove the wiring harness support bracket.
9. Detach the starter motor.
10. Position the starter motor to provide access to the starter motor
cables.
11. Remove the starter motor solenoid cover and electrical connector
retaining nut.
12. Remove the starter motor.
Remove the starter motor electrical connector retaining nut.
Installation
1. To install, reverse the removal procedure.
Tighten to 12 Nm.
2. Tighten to 6 Nm.
3. Tighten to 25 Nm.
4. Tighten to 23 Nm.
Published: 11-May-2011
Starting System - Starter Motor2.2L Duratorq-TDCi (110kW/150PS) - Puma
Removal and Installation
Removal
1. Disconnect the battery.
For additional information, refer to:
Battery Disconnect and Connect
(414-01 Battery, Mounting and Cables, General Procedures).
2. Remove the air deflector.
For additional information, refer to:
Air Deflector - 2.0L Duratorq-
TDCi/2.2L Duratorq-TDCi (110kW /150PS) - Puma
(501-02 Front End Body
Panels, Removal and Installation).
3. Reposition the starter motor solenoid cover.
4. Remove the starter motor electrical connector retaining nut.
Disconnect the electrical connector.
5. Remove the starter motor electrical connector retaining nut.
Disconnect the electrical connector.
6. Detach the wiring harness retaining clips from the wiring harness
support bracket.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст