Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 215
91. Disconnect the reverse lamp switch electrical connector.
92. Disconnect the emission control solenoid electrical connector.
93. Disconnect the emission control solenoid hose.
94. Remove the emission control solenoid assembly.
95. Detach the starter motor wiring harness.
96. Remove the starter motor wiring harness retaining bracket.
97. Disconnect the starter motor wiring harness electrical connector.
98. Detach the starter motor wiring harness.
1. Disconnect the starter motor electrical connector.
2. Disconnect the starter motor solenoid electrical connector.
99. Remove the starter motor.
100. Disconnect the crankshaft position (CKP) sensor electrical connector.
101. Remove the transmission upper retaining bolts.
102. Remove the transmission right-hand retaining bolts.
103.
CAUTION: Do not support the engine and transaxle assembly
directly on the oil pan. Failure to follow this instruction may cause damage
to the component.
Remove the engine assembly from the transmission assembly.
Published: 11-May-2011
Engine - 2.0L Duratorq-TDCi/2.2L Duratorq-TDCi (110kW/150PS) - Puma - Engine
Disassembly
Special Tool(s)
Engine stand
303-011
Universal Flange Holding Wrench
205-053
Adapter for 205-053-02
205-053-02
Timing Tool, Crankshaft
303-698
Remover, Fuel Injector
303-711
Remover/Installer, Cooling Hose Clamp
303-397
Disassembly
All vehicles
1. Using the special tool, mount the engine to the engine stand.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст