Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 416
Published: 11-May-2011
Manual Transmission/Transaxle - Support Insulator
In-vehicle Repair
Special Tool(s)
Powertrain assembly jack
HTJ1200-2
Removal
All vehicles
1. Raise and support the vehicle.
For additional information, refer to:
Lifting
(100-02 Jacking and Lifting,
Description and Operation).
2. Install the special tool.
3. NOTE: Left-hand shown, right-hand similar.
Position and adjust the special tool height rear adjuster.
4. NOTE: Right-hand shown, left-hand similar.
Position and adjust the special tool front height adjuster.
5. Position and adjust the special tool engine height adjusters.
6. Remove the retaining nut.
Vehicles with 5-speed manual transaxle
7. Detach the support bar.
8. Remove the support bar.
9. Remove the spacer.
All vehicles
10. Remove the transmission mount.
Remove the transmission mount retaining nuts.
Installation
All vehicles
1. Install the transmission mount.
Tighten to 47 Nm.
Vehicles with 5-speed manual transaxle
2. Install the spacer.
3. Install the support bar.
4. Tighten to 25 Nm.
All vehicles
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст