Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 258

9. NOTE: Shown with the EGR cooler to EGR valve tube removed for clarity.

Detach the wiring harness.

10. NOTE: Shown with the EGR cooler to EGR valve tube removed for
clarity.

Detach the water pump.

Detach the wiring harness from the water pump lower retaining
bolts.

11. Remove the water pump.

Remove and discard the gasket.

12. Remove and discard the water pump O-ring seal.

13. Remove the engine oil temperature control thermostat.

Remove and discard the O-ring seal.

Installation

All vehicles

1. NOTE: Install a new engine oil temperature control thermostat O-ring
seal.

Install the engine oil temperature control thermostat.

2. Install a new water pump O-ring seal.

3. NOTE: Install a new water pump gasket.

Install the water pump.

4. NOTE: Shown with the EGR cooler to EGR valve tube removed for clarity.

Attach the water pump.

Tighten the water pump retaining bolts to 24 Nm.

Attach the wiring harness to the water pump lower retaining bolts.

5. NOTE: Shown with the EGR cooler to EGR valve tube removed for clarity.

Attach the wiring harness.

6. Using the special tool, connect the coolant hoses to the water pump.

7. Coat the power steering pump drive shaft splines with

grease

.

8. NOTE: Shown with the EGR cooler to EGR valve tube removed for clarity.

Attach the power steering pump to the water pump.

9. NOTE: Shown with the EGR cooler to EGR valve tube removed for clarity.

Install the power steering pump securing bracket.

Tighten to 25 Nm.

10. NOTE: Shown with the EGR cooler to EGR valve tube removed for
clarity.

Install the power steering pump retaining bolts.

Tighten to 25 Nm.

11. NOTE: Shown with the EGR cooler to EGR valve tube removed for
clarity.

Install the power steering pump retaining bolts.

Tighten to 10 Nm.