Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 492
Published: 11-May-2011
Heating and Ventilation - Blower Motor
Removal and Installation
Removal
1. Remove the blower motor lower cover.
2. Disconnect the electrical connector.
3. Remove the blower motor.
Remove the blower motor retaining screws.
Installation
1. To install, reverse the removal procedure.
Published: 11-May-2011
Heating and Ventilation - Evaporator Core Housing
Removal and Installation
Removal
1. Disconnect the battery ground cable.
2. Recover the refrigerant. For additional information, refer to Section
412-00 Climate Control System - General Information
.
3. Drain the cooling system. For additional information, refer to Section
303-03A Engine Cooling
Section
303-03B Engine Cooling
.
4. Disconnect the drain tube from the heater core.
5. Disconnect the heater hose from the heater core.
6. Disconnect the heater hose from the heater core.
7. Lower the vehicle.
8. Remove the refrigerant line retaining clip.
9. Using a suitable tool disconnect the refrigerant line.
10. Remove the refrigerant line retaining clip.
11. Using a suitable tool disconnect the refrigerant line.
12. Remove the evaporator core housing lower securing nut.
13. Remove the instrument panel. For additional information, refer to
Section
501-12 Instrument Panel and Console
.
14. Remove the center register air duct.
15. Disconnect the electrical connectors.
1. On manual A/C only.
2. All vehicles.
16. Disconnect the electrical connector.
17. Remove the glove box mounting frame.
Remove the retaining bolts.
18. Disconnect the electrical connector.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст