Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 658
Published: 11-May-2011
Wipers and Washers - Windshield Washer Reservoir
Removal and Installation
Removal
1. Disconnect the ABS electrical connector.
2. Detach the ABS module.
3. Remove the ABS module support bracket retaining bolts.
4. Remove the ABS module support bracket.
5. Remove the reservoir filler neck.
6. Remove the front bumper cover. For additional information, refer to
Section
501-19 Bumpers
.
7. Disconnect the headlamp washer supply hose.
8. Remove the reservoir.
1. Disconnect the washer pump, headlamp washer pump and fluid
level switch electrical connectors.
2. Disconnect the washer pump supply hose.
3. Remove the reservoir.
Installation
1. To install, reverse the removal procedure.
Published: 11-May-2011
Wipers and Washers - Windshield Wiper Motor
Removal and Installation
Removal
1. Remove the mounting arm and pivot shaft assembly. For additional
information, refer to
Mounting Arm and Pivot Shaft
.
2. Remove the wiper motor.
Installation
1. To install, reverse the removal procedure.
Tighten to 8 Nm.
2. Tighten to 18 Nm.
Published: 11-May-2011
Wipers and Washers - Wiper Mounting Arm and Pivot Shaft
Removal and Installation
Removal
1. Remove the plenum cover. For additional information, refer toSection
501-02 Front End Body Panels
.
2. Detach the mounting arm and pivot shaft assembly.
3. Remove the mounting arm and pivot shaft assembly.
Installation
1. To install, reverse the removal procedure.
Tighten to 8 Nm.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст