Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 659
Published: 11-May-2011
Wipers and Washers - Wiper Pivot Arm
Removal and Installation
Special Tool(s)
Remover - windscreen wiper
501-065
Removal
1. Remove the wiper arm nut covers
2. Remove the wiper arm nuts.
3. Using the special tool, detach the wiper arms.
4. Remove the wiper arms
Installation
1. To install, reverse the removal procedure.
Tighten to 17 Nm.
Published: 11-May-2011
Roof Opening Panel -
Torque Specifications
Description
Nm
lb-ft
lb-in
Roof opening panel frame retaining bolts
9
-
80
Roof opening panel bracket retaining bolts
9
-
80
Roof opening panel motor retaining bolts
3
-
27
Roof opening panel glass retaining screws
3
-
27
Published: 11-May-2011
Roof Opening Panel - Roof Opening Panel
Description and Operation
Item
Part Number
Description
1
—
Roof opening panel shield
2
—
Lifter arms
3
—
Air deflector
4
—
Roof opening panel frame
5
—
Roof opening panel motor
6
—
Roof opening panel glass
The roof opening panel is available as an option. The roof opening panel control module controls the roof opening panel. The roof opening
panel motor and module are not available separately. The roof opening panel may be operated from the roof opening panel switch or the
global close function.
Roof Opening Panel Switch Operation
The system operates as follows from the roof opening panel switch:
Press the rear of the switch to the first detent with the roof opening glass in the closed position.
- The roof opening glass opens rearward until the roof opening panel switch is released or the roof opening panel glass reaches
the full open position.
Press the rear of the switch to the second detent with the roof opening panel glass in the closed position.
- Activates the express open feature.
- The roof opening glass will slide rearward until the roof opening panel switch is pressed in any direction or the roof opening
glass reaches the full open position.
Press the front of the switch to the first detent with the roof opening panel glass in the closed position.
- The roof opening panel glass will vent up until the roof opening panel switch is released or the roof opening panel glass reaches
the full vent up position.
Press the front of the switch to the second detent with the roof opening glass in the closed position.
- The roof opening glass will vent up until the roof opening glass reaches the full vent up position or the switch is pressed in any
direction.
Press the front of the switch to the first detent with the roof opening glass in a rearward open position.
- The roof opening glass will slide forward until the roof opening glass reaches the fully closed position or the switch is released.
Press the front of the switch to the second detent with the roof opening glass in a rearward position.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст