Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 242
89. Connect the coolant hose.
90. Attach the coolant hose.
91. Connect the fuel fired booster heater electrical connector to the
subframe retaining tang.
Vehicles without electric booster heater
92. Attach the coolant hose.
Connect the coolant hose.
93. Attach the coolant hoses to the retaining clips.
94. Attach the electric booster heater electrical connector to the subframe
retaining tang.
Vehicles without auxiliary heating
95. Connect the heater hoses to the heater core.
All vehicles
96. Install the exhaust flexible pipe.
For additional information, refer to:
Exhaust Flexible Pipe - 2.0L
Duratorq-TDCi/2.2L Duratorq-TDCi (110kW/150PS) - Puma
(309-00
Exhaust System, Removal and Installation).
97. Install the battery tray.
For additional information, refer to:
Battery Tray
(414-01 Battery,
Mounting and Cables, Removal and Installation).
98. Check and top up the transmission fluid level.
For additional information, refer to:
Transaxle Draining and Filling -
Vehicles W ith: 5-Speed Manual Transmission - MT75
(308-03 Manual
Transmission/Transaxle, General Procedures).
99. Carry out the clutch bleeding system procedure.
For additional information, refer to:
Clutch System Bleeding - Vehicles
W ith: 5-Speed Manual Transmission - MT75
(308-00 Manual
Transmission/Transaxle and Clutch - General Information, General
Procedures).
100. Fill and bleed the cooling system.
For additional information, refer to:
Cooling System Draining, Filling and
Bleeding
(303-03B Engine Cooling - 2.0L Duratorq-TDCi/2.2L
Duratorq-TDCi (110kW /150PS) - Puma, General Procedures).
101. Recharge the air conditioning refrigerant.
For additional information, refer to:
Air Conditioning (A/C) System
Recovery, Evacuation and Charging
(412-00 Climate Control System -
General Information, General Procedures).
102. Install the steering column coupling.
103. Attach the lower steering column shaft.
Install a new retaining bolt.
Tighten to 25 Nm.
104. Bleed the power steering system.
For additional information, refer to:
Power Steering System Filling
(211-00 Steering System - General Information, General Procedures).
105. Carry out the gear shift cable adjustment procedure.
For additional information, refer to:
Gearshift Cable Adjustment
(308-00
Manual Transmission/Transaxle and Clutch - General Information,
General Procedures).
106. Carry out the underbody misalignment check.
For additional information, refer to:
Underbody Misalignment Check
(502-00 Uni-Body, Subframe and Mounting System, General Procedures).
Published: 11-May-2011
Engine Cooling - 2.0L NA V6 - AJV6/2.5L NA V6 - AJV6/3.0L NA V6 - AJ27 -
Fluids and Lubricants
Description
Specification
Jaguar Premium Cooling System Fluid
ESE-M97B44-A
Premium Cooling System Flush
EGR-M14P7-A
O-Ring Lubricant
ESE-M99B176-A
Cooling System Refill Capacities
Engine
Capacity
2.5/3.0L
8.25L
Torque Specifications
Description
Nm
lb-ft
lb-in
Air conditioning condenser retaining bolts
7
-
62
Block heater
40
30
-
Coolant expansion tank retaining bolt
3
-
27
Cooling fan motor control module retaining screws
2
-
18
Cooling fan motor retaining nuts
6
-
53
Engine block drain plug
40
30
-
Radiator drain plug
1
-
9
Radiator support beam retaining bolts
25
18
-
Thermostat housing retaining bolts
10
-
89
W ater pump housing retaining bolts
10
-
89
W ater pump to water pump housing retaining bolts
10
-
89
W ater pump drive pulley retaining bolts
11
8
-
W ater pump housing inlet pipe retaining nuts
9
-
80
W ater pump housing inlet pipe retaining studs
12
9
-
W ater pump housing outlet pipe retaining bolts
10
-
89
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст