Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 348
2.
CAUTION: Make sure the torque wrench setting procedure is
followed correctly. Failure to follow this instruction may result in damage
to the vehicle.
Install the catalytic converter temperature sensor.
Tighten to 35 Nm.
3. Connect the catalytic converter temperature sensor electrical connector.
4. Install the turbocharger heatshield.
Tighten to 9 Nm.
5. NOTE: Remove the oil filler cap and oil level indicator.
Install the engine cover.
6. Install the oil filler cap.
7. Install the oil level indicator.
Published: 11-May-2011
Electronic Engine Controls - 2.0L Duratorq-TDCi/2.2L Duratorq-TDCi (110kW/150PS) -
Puma - Crankshaft Position (CKP) Sensor
Removal and Installation
Removal
1. Disconnect the electrical connector.
2. Remove and discard the crankshaft position (CKP) sensor.
Installation
1. NOTE: Only turn the engine in the normal direction of rotation
Turn the engine until a flywheel trigger tooth is visible through the CKP
sensor housing.
2.
CAUTION: The CKP sensor tip must rest on a flywheel trigger
tooth. Incorrect installation may result in the CKP sensor being damaged.
• NOTE: Make sure that the CKP sensor housing is clean and free from
foreign material.
Install the CKP sensor.
Tighten to 7 Nm.
3. Connect the CKP sensor electrical connector.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст