Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 349
Published: 11-May-2011
Electronic Engine Controls - 2.0L Duratorq-TDCi/2.2L Duratorq-TDCi (110kW/150PS) -
Puma - Cylinder Head Temperature (CHT) Sensor
Removal and Installation
Special Tool(s)
Socket, CHT Sensor
303-680 (21-239)
Removal
1. Remove the air cleaner.
For additional information, refer to:
Air Cleaner
(303-12B Intake Air
Distribution and Filtering - 2.0L Duratorq-TDCi/2.2L Duratorq-TDCi
(110kW/150PS) - Puma, Removal and Installation).
2. Detach the power assisted steering fluid pipe.
3. Remove the power steering pump belt cover retaining nut.
4. Remove the power steering pump belt cover.
5. Detach the cyclinder head temperature (CHT) sensor electrical
connector.
6. Disconnect the CHT sensor electrical connector.
7. Using the special tool 303-680, remove the CHT sensor.
Installation
1. To install, reverse the removal procedure.
Tighten to 10 Nm.
2. Tighten to 10 Nm.
Published: 11-May-2011
Electronic Engine Controls - 2.0L Duratorq-TDCi/2.2L Duratorq-TDCi (110kW/150PS) -
Puma - Diesel Particulate Filter (DPF) Temperature Sensor
Removal and Installation
Removal
1. Remove the air deflector.
For additional information, refer to:
Air Deflector - 2.0L Duratorq-
TDCi/2.2L Duratorq-TDCi (110kW /150PS) - Puma
(501-02 Front End Body
Panels, Removal and Installation).
2. Disconnect the diesel particulate filter (DPF) temperature sensor
electrical connector.
3. Remove the DPF temperature sensor.
Installation
1. To install, reverse the removal procedure.
Tighten to 35 Nm.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст