Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 197
15. Install the generator upper retaining bolt.
Tighten to 47 Nm.
16. Tighten to 47 Nm.
17. Connect the generator electrical connector.
18. Attach the generator positive cable.
Tighten to 8 Nm.
19. Install the crankshaft front seal.
For additional information, refer to:
Crankshaft Front Seal
(303-01B
Engine - 2.0L Duratorq-TDCi/2.2L Duratorq-TDCi (110kW /150PS) - Puma,
In-vehicle Repair).
20. Install the retaining nuts.
1. Install the retaining bracket.
2. Install the retaining nuts.
21. Attach the engine wiring harness.
22. Attach the engine wiring harness.
23. Install the engine front mount.
For additional information, refer to:
Engine Front Mount
(303-01B Engine
- 2.0L Duratorq-TDCi/2.2L Duratorq-TDCi (110kW /150PS) - Puma,
In-vehicle Repair).
Published: 11-May-2011
Engine - 2.0L Duratorq-TDCi/2.2L Duratorq-TDCi (110kW/150PS) - Puma - Engine
Front Mount
In-vehicle Repair
Special Tool(s)
Engine support bracket
303-021
Engine lifting eye
303-1067
Removal
All vehicles
1. Remove the oil level indicator.
2. Remove the oil filler cap.
3. NOTE: Install the oil filler cap and oil level indicator to prevent foreign
material entering the valve cover.
Remove the engine cover.
4. Detach the wiring harness from the engine cover mounting bracket.
5. Detach the electrical connector from the engine cover mounting bracket.
6. Remove the engine cover mounting bracket.
7. Install the special tool.
Tighten to 23 Nm.
8. Using the special tool, support the engine and transmission assembly.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст