Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 115

3. NOTE: Left-hand drive vehicles shown, right-hand drive vehicles similar.

Attach the right-hand side of the steering gear.

Loosely install the steering gear retaining bolt.

4. NOTE: Left-hand drive vehicles shown, right-hand drive vehicles similar.

Attach the left-hand side of the steering gear.

Loosely install the steering gear retaining bolt.

5. NOTE: Left-hand drive vehicles shown, right-hand drive vehicles similar.

Tighten the right-hand side steering gear retaining bolt.

Tighten to 115 Nm.

6. NOTE: Left-hand drive vehicles shown, right-hand drive vehicles similar.

Tighten the left-hand side steering gear retaining bolt.

Tighten to 115 Nm.

Right-hand drive vehicles

7. NOTE: Remove the blanking plug.

Install a new O-ring seal.

8. NOTE: Remove the blanking plug.

Connect the power steering high pressure pipe to the power steering
pump.

Tighten to 30 Nm

9. Install the power steering high pressure pipe bracket retaining bolt.

Tighten to 25 Nm

All vehicles

10. Install new O-ring seals.

11. NOTE: Left-hand drive vehicles shown, right-hand drive vehicles
similar.

• NOTE: Remove the blanking plugs.

Connect the power steering high and low pressure pipes to the steering
gear.

1. Connect the power steering low pressure pipe.

2. Connect the power steering high pressure pipe.

3. Install the latch plate retaining bolt

1. Tighten to 10 Nm.

Left-hand drive vehicles

12. Install the retaining clip to the power steering high and low pressure

pipes.

All vehicles

13. Using the special tool raise the front subframe.

14. NOTE: Left-hand shown, right-hand similar.

Loosely install the front subframe rear mount retaining bolts.

15. NOTE: Left-hand shown, right-hand similar.

Loosely install the front subframe reinforcement plate retaining bolts.

16. NOTE: Left-hand shown, right-hand similar.

Tighten to 142 Nm.

17. NOTE: Left-hand shown, right-hand similar.

Tighten the front subframe reinforcement bolts.

M8 to 35 Nm.

M10 to 70 Nm.

18. Remove the special tool.

Vehicles with automatic transmission

19. Attach the selector lever cable.

All vehicles