Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 145
2. Tighten to 40 Nm.
3. Install the three way catalytic converter (TWC). For additional
information, refer to Section
309-00 Exhaust System
.
Published: 11-May-2011
Engine - 2.0L NA V6 - AJV6/2.5L NA V6 - AJV6/3.0L NA V6 - AJ27 - Flywheel
In-vehicle Repair
Removal
1. Remove the clutch disc and pressure plate. For additional information,
refer to Section
308-01 Clutch
.
2. NOTE: Prevent the flywheel from rotating.
Remove the flywheel.
Installation
1. NOTE: Make sure the crankshaft and flywheel mating faces are clean
before installation.
• NOTE: The flywheel will only locate in one position.
• NOTE: Tighten the retaining bolts working diagonally.
Install the flywheel.
Prevent the flywheel from rotating.
Tighten to 80 Nm.
2. Install the clutch disc and pressure plate. For additional information,
refer to Section
308-01 Clutch
.
Published: 11-May-2011
Engine - 2.0L NA V6 - AJV6/2.5L NA V6 - AJV6/3.0L NA V6 - AJ27 - Intake Manifold
In-vehicle Repair
Removal
All vehicles
1. Remove the engine cover (if equipped).
2. Remove the air filter outlet pipe.
For additional information, refer to:
Air Cleaner Outlet Pipe
(303-12A
Intake Air Distribution and Filtering - 2.0L NA V6 - AJV6/2.5L NA V6 -
AJV6/3.0L NA V6 - AJ27, Removal and Installation).
Vehicles with 2.5L or 3.0L engine
3. Remove the positive crankcase ventilation hose.
4. Remove the air cleaner resonator.
Vehicles with 2.0L engine
5. Detach the positive crank case ventilation hose.
6. Detach the cruise control cable.
7. Detach the throttle cable.
1. Reposition the throttle lever to the fully open position.
2. Detach the throttle cable.
8. Detach the throttle cable retaining bracket.
9. Disconnect the throttle body electrical connector.
10. Disconnect the throttle body electrical connector.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст