Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 384

7. Using the special tools, release the LH halfshaft.

8.

CAUTION: Make sure the halfshaft constant velocity (CV) joints do

not over articulate. Failure to follow this instruction may result in damage
to the CV joints.

Using a suitable tie strap, support the LH halfshaft.

9. Remove the charge air cooler intake pipe.

Release the 2 hose clips.

Remove the 2 bolts.

10. Support the power steering fluid pipe.

11. Release the emission control valve.

Remove the 2 bolts.

Position aside.

12. Release coolant pipe from the engine.

Remove the 2 bolts.

13. Remove the flexplate cover.

14. Release the torque convertor from the flexplate.

Remove the 6 bolts.

15. Disconnect the 2 transmission fluid cooler tubes.

Remove the 2 Torx bolts.

Position aside.

16. Lower the vehicle.

17. Disconnect the transmission control module (TCM) electrical connector.

18. Release the transmission selector cable from the bracket.

Release the locking sleeve and release from the bracket.

19. Release the transmission selector lever cable from the TCM.

Remove the nut.

Release the selector cable and lever.

Position aside.

20. Disconnect the battery ground cable.

Remove the bolt.

21. Using the special tool, support the engine and transmission assembly.