Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 605
Installation
1. To install, reverse the removal procedure.
Tighten to 8 Nm.
Published: 11-May-2011
Interior Trim and Ornamentation - Parcel Shelf
Removal and Installation
Removal
Vehicles with split rear seat backrest
1. Remove the rear seat cushion.
For additional information, refer to:
Rear Seat Cushion
(501-10 Seating,
Removal and Installation).
2. Remove the rear center safety belt and buckle.
Remove the retaining bolt.
All vehicles
3. Remove both C-pillar trim panels.
For additional information, refer to:
C-Pillar Trim Panel - 4-Door
(501-05
Interior Trim and Ornamentation, Removal and Installation).
4. NOTE: Left-hand shown, right-hand similar.
Detach the rear safety belt retractor trim panel.
Vehicles with split rear seat backrest
5. NOTE: Left-hand shown, right-hand similar.
Remove the rear seat backrest latch cover.
All vehicles
6. Remove the parcel shelf.
Pass the rear centre safety belt through the parcel shelf.
Installation
1. To install, reverse the removal procedure.
Tighten to 55 Nm.
Published: 11-May-2011
Interior Trim and Ornamentation - Rear Door Trim Panel
Removal and Installation
Removal
1. Remove the retaining screw cover.
2. Remove the retaining screw.
3. Remove the retaining screw.
4. Detach the rear door trim panel.
5. Detach the door handle cable.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст