Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 44
Published: 11-May-2011
Rear Suspension - Wheel Knuckle Front Bushing
Removal and Installation
Special Tool(s)
Support Cup, Rear wheel knuckle front bush
204-300
Remover, Rear wheel knuckle front bush
204-301
Installer, Rear wheel knuckle front bush
204-302
Removal
1. Remove the wheel knuckle. For additional information, refer to For
additional information, refer to: W heel Knuckle (204-02, Removal and
Installation)..
2. Using the special tools, remove the wheel knuckle front bushing.
Installation
1. Using the special tools, install the wheel knuckle front bushing.
2. Install the wheel knuckle. For additional information, refer to For
additional information, refer to: W heel Knuckle (204-02, Removal and
Installation)..
Published: 11-May-2011
Rear Suspension - Wheel Knuckle Rear Bushing
Removal and Installation
Special Tool(s)
Forcing Screw, Rear Wheel Knuckle Rear Bush
204-246
Support Cup, Rear W heel Knuckle Rear Bush
204-296
Remover, Rear Wheel Knuckle Rear Bush
204-298
Installer, Rear Wheel Knuckle Rear Bush
204-297
Removal
1. Remove the rear wheel and tire.
For additional information, refer to:
Wheel and Tire
(204-04 Wheels and
Tires, Removal and Installation).
2. Detach the stabilizer bar link.
3.
CAUTION: Make sure that excessive strain is not placed on the
lower arm.
Using a suitable transmission stand, support the rear lower arm.
4. Detach the rear lower arm.
5.
CAUTION: Carefully lower the transmission jack.
Using the special tools, remove the wheel knuckle rear bushing.
Installation
• NOTE: The final tightening of the rear suspension components must be carried out with the vehicle on its wheels.
1. Using the special tools, install the wheel knuckle rear bushing.
Align the bushing horizontally.
2.
CAUTION: Carefully raise the transmission jack.
Attach the rear lower arm.
3. Attach the stabilizer bar link.
4. Install the rear wheel and tire.
For additional information, refer to:
Wheel and Tire
(204-04 Wheels and
Tires, Removal and Installation).
5. Tighten to 124 Nm.
6. Tighten to 35 Nm.
7. Check the wheel alignment and adjust as necessary.
For additional information, refer to:
Wheel Alignment Angles
(204-00
Suspension System - General Information, Description and Operation).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст