Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 669
22.
CAUTION: Make sure the bumper cover is supported before
removing the retaining nuts.
Remove the bumper cover retaining nuts.
Vehicles with parking aid
23. Disconnect the electrical connector.
24. Detach the grommet.
All vehicles
25. Remove the bumper cover.
Installation
1. To install, reverse the removal procedure.
2. Tighten to 4 Nm.
3. Tighten to 4 Nm.
4. Tighten to 4 Nm.
5. Tighten to 4 Nm.
6. Tighten to 4 Nm.
7. Tighten to 8 Nm.
Published: 11-May-2011
Bumpers - Rear Bumper Cover Insert4-Door
Removal and Installation
Removal
1. Remove the rear bumper cover. For additional information, refer
toSection
501-19 Bumpers
.
2. Remove the energy absorbing foam.
1. Remove the energy absorbing foam retaining clips.
2. Remove the energy absorbing foam.
3. Remove the bumper insert retaining clips.
4. Using a suitable thin lever to avoid damaging the paintwork,
progressively ease the moulding away from the front bumper.
Installation
1. To install, reverse the removal procedure.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст