Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 581
Installation
1. To install, reverse the removal procedure.
Tighten to 3 Nm.
2. Tighten to 3 Nm.
3. Tighten to 9 Nm.
4. Connect the battery ground cable.
For additional information, refer to:
Battery Connect
(414-01 Battery,
Mounting and Cables, General Procedures).
Published: 11-May-2011
Navigation System - Navigation System ModuleWagon
Removal and Installation
Removal
1. NOTE: Make sure the navigation DVD disc has been removed and the
audio unit pin code is available before disconnecting the battery ground
cable.
Disconnect the battery ground cable
For additional information, refer to:
Battery Disconnect and Connect
(414-01 Battery, Mounting and Cables, General Procedures).
2. Raise the loadspace floor covering.
3. Remove the loadspace floor covering.
4. Remove the centre loadspace stowage compartment.
5. Remove the loadspace stowage compartment trim panel.
6. Remove the loadspace stowage compartment.
7. Remove the loadspace floor covering retaining screws.
8. Detach the loadspace floor covering upwards.
9. Remove the left-hand loadspace stowage compartment retaining screw.
10. Remove the left-hand loadspace stowage compartment.
11. Detach the module retaining bracket.
12. Disconnect the navigation system module electrical connectors.
13. Disconnect the compact disc (CD) changer electrical connectors.
14. Disconnect the voice activated control module (VACM) electrical
connectors.
15. Disconnect the cellular phone module electrical connectors.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст